Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Sentra 2006-2009 Approved Nissan Sentra 2007 GW

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download GW documenatation <<

Text preview - extract from the document

I BODY

GLASSES, WINDOW SYSTEM & MIRRORS
SECTION GW B

E
CONTENTS
PRECAUTIONS ......................................................... 3
. POWER WINDOW LOCK .................................. 19 . F
Precautions for Supplemental Restraint System RETAINED POWER OPERATION ..................... 19 .
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- CAN Communication System Description ............. 19 .
SIONER" ................................................................. 3
. Schematic .............................................................. 20
. G
Precautions for Procedures without Cowl Top Cover 3 ..... Wiring Diagram -- WINDOW -- ............................ 21 .
Handling for Adhesive and Primer .......................... 3 . Main Power Window and Door Lock/Unlock Switch
PREPARATION .......................................................... 4
. Harness Connector Terminal Layout ..................... 25 .
H
Commercial Service Tools ....................................... 4 . Terminals and Reference Values for Main Power
SQUEAK AND RATTLE TROUBLE DIAGNOSES..... 5 Window and Door Lock/Unlock Switch .................. 25 .
Work Flow ............................................................... 5
. Terminals and Reference Values for BCM ............. 25 .
CUSTOMER INTERVIEW .................................... 5 . Work Flow .............................................................. 26
. GW
DUPLICATE THE NOISE AND TEST DRIVE ...... 6 . CONSULT-III Function (BCM) ............................... 26 .
CHECK RELATED SERVICE BULLETINS .......... 6 . ACTIVE TEST .................................................... 26.
LOCATE THE NOISE AND IDENTIFY THE WORK SUPPORT .............................................. 26 . J
ROOT CAUSE ..................................................... 6 . DATA MONITOR ................................................ 26 .
REPAIR THE CAUSE .......................................... 6 . Trouble Diagnoses Symptom Chart ...................... 27 .
CONFIRM THE REPAIR ...................................... 7 . BCM Power Supply and Ground Circuit Check ..... 27 .
K
Generic Squeak and Rattle Troubleshooting .......... 7 . Main Power Window and Door Lock/Unlock Switch
INSTRUMENT PANEL ......................................... 7 . Power Supply and Ground Circuit Check .............. 27 .
CENTER CONSOLE ............................................ 7 . Power Window and Door Lock/Unlock Switch RH
DOORS ................................................................ 7
. Power Supply Circuit Check .................................. 29 . L
TRUNK ................................................................. 8
. Front Power Window LH Circuit Check ................. 29 .
SUNROOF/HEADLINING .................................... 8 . Front Power Window RH Circuit Check (Power Win-
OVERHEAD CONSOLE (FRONT AND REAR)..... 8 dow and Door Lock/Unlock Switch RH Operation) 30 ... M
SEATS .................................................................. 8
. Front Power Window RH Circuit Check (Main Power
UNDERHOOD ...................................................... 8 . Window and Door Lock/Unlock Switch Operation) 34 ...
Diagnostic Worksheet ............................................. 9 . Door Switch Check ................................................ 36.
WINDSHIELD GLASS ..............................................11 . Rear Power Window LH Circuit Check (Rear Power
Removal and Installation ........................................11 . Window Switch LH Operation) ............................... 37 .
REMOVAL ...........................................................11
. Rear Power Window LH Circuit Check (Main Power
INSTALLATION .................................................. 12 . Window and Door Lock/Unlock Switch Operation) 41 ...
REAR WINDOW GLASS AND MOLDING .............. 13 . Rear Power Window RH Circuit Check (Rear Power
Removal and Installation ....................................... 13 . Window Switch RH Operation) .............................. 43 .
REMOVAL .......................................................... 13
. Rear Power Window RH Circuit Check (Main Power
INSTALLATION .................................................. 14 . Window and Door Lock/Unlock Switch Operation) 46 ...
POWER WINDOW SYSTEM ................................... 15 . FRONT DOOR GLASS AND REGULATOR ............ 48 .
Component Parts and Harness Connector Location 15 ... Removal and Installation ....................................... 48 .
System Description ............................................... 15. DOOR GLASS .................................................... 48 .
MANUAL OPERATION ...................................... 16 . REGULATOR ASSEMBLY ................................. 49 .
AUTO OPERATION ........................................... 18 . Inspection after Installation .................................... 50.

Revision: December 2006 GW-1 2007 Sentra
POWER WINDOW SYSTEM INITIALIZATION ... 50 ACTIVE TEST .....................................................61
.
INSTALLED GLASS INSPECTION .................... 50 . Trouble Diagnoses Symptom Chart .......................61 .
Disassembly and Assembly ................................... 51 . BCM Power Supply and Ground Circuit Check .....62 .
POWER WINDOW REGULATOR ASSEMBLY ... 51 Rear Window Defogger Switch Circuit Check ........62 .
REAR DOOR GLASS AND REGULATOR .............. 52 . Rear Window Defogger Circuit Check ...................64 .
Removal and Installation ....................................... 52 . Door Mirror Defogger Circuit Check .......................66 .
DOOR GLASS .................................................... 52 . Filament Check ......................................................67
.
REGULATOR ASSEMBLY ................................. 53 . Filament Repair ......................................................68
.
Disassembly and Assembly ................................... 54 . REPAIR EQUIPMENT ........................................68 .
POWER WINDOW REGULATOR ASSEMBLY ... 54 REPAIRING PROCEDURE ................................68 .
Inspection after Installation .................................... 54. DOOR MIRROR ........................................................70
.
INSTALLED GLASS INSPECTION .................... 54 . Wiring Diagram -- MIRROR -- .............................70 .
REAR WINDOW DEFOGGER ................................. 55 . Removal and Installation ........................................71.
Component Parts and Harness Connector Location 55 ... REMOVAL ...........................................................71
.
System Description ................................................ 55
. INSTALLATION ...................................................71
.
CAN Communication System Description ............. 56 . Disassembly and Assembly ...................................72 .
Schematic .............................................................. 57
. DISASSEMBLY ...................................................72.
Wiring Diagram -- DEF -- .................................... 58 . ASSEMBLY .........................................................72
.
Terminals and Reference Values for BCM ............. 61 . INSIDE MIRROR ......................................................73
.
Terminals and Reference Values for IPDM E/R ..... 61 . Removal and Installation ........................................73.
Work Flow .............................................................. 61
. REMOVAL ...........................................................73
.
CONSULT-III Function (BCM) ................................ 61 . INSTALLATION ...................................................73
.
DATA MONITOR ................................................. 61 .

Revision: December 2006 GW-2 2007 Sentra
PRECAUTIONS

PRECAUTIONS PFP:00001
A
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EIS00ATX

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along B
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front C
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING: D
G To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer. E
G Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section. F
G Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
G
Precautions for Procedures without Cowl Top Cover EIS00ATY

When performing the procedure after removing cowl top cover, cover
the lower end of windshield. H

PIIB3706J
K
Handling for Adhesive and Primer EIS00ATZ

G Do not use an adhesive which is past its usable date. Shelf life of the adhesive is limited to six months
after the date of manufacture. Carefully adhere to the expiration or manufacture date printed on the box. L
G Keep primers and adhesive in a cool, dry place. Ideally, they should be stored in a refrigerator.
G Open the seal of the primer and adhesive just before application. Discard the remainder after application.
M
G Before application, be sure to shake the primer container to stir the contents. If any floating material is
found, do not use it.
G If any primer or adhesive contacts the skin, wipe it off with gasoline or equivalent and wash the skin with
soap.
G When using primer and adhesive, always observe the precautions in the instruction manual.

Revision: December 2006 GW-3 2007 Sentra
PREPARATION

PREPARATION PFP:00002

Commercial Service Tools EIS00AU0

Tool name Description

Engine ear Locating the noise

SIIA0995E

Suction lifter Holding of door glass

PIIB1805J

Revision: December 2006 GW-4 2007 Sentra
SQUEAK AND RATTLE TROUBLE DIAGNOSES

SQUEAK AND RATTLE TROUBLE DIAGNOSES PFP:00000
A
Work Flow EIS00AU1

SBT842
G

CUSTOMER INTERVIEW
Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diag- H
nostic Worksheet during the interview to document the facts and conditions when the noise occurs and any
customer's comments; refer to GW-7, "Generic Squeak and Rattle Troubleshooting" . This information is nec-
essary to duplicate the conditions that exist when the noise occurs.
GW
G The customer may not be able to provide a detailed description or the location of the noise. Attempt to
obtain all the facts and conditions that exist when the noise occurs (or does not occur).
G If there is more than one noise in the vehicle, be sure to diagnose and repair the noise that the customer
J
is concerned about. This can be accomplished by test driving the vehicle with the customer.
G After identifying the type of noise, isolate the noise in terms of its characteristics. The noise characteristics
are provided so the customer, service adviser and technician are all speaking the same language when
defining the noise. K
G Squeak --(Like tennis shoes on a clean floor)
Squeak characteristics include the light contact/fast movement/brought on by road conditions/hard sur-
faces = higher pitch noise/softer surfaces = lower pitch noises/edge to surface = chirping. L
G Creak--(Like walking on an old wooden floor)
Creak characteristics include firm contact/slow movement/twisting with a rotational movement/pitch
dependent on materials/often brought on by activity. M
G Rattle--(Like shaking a baby rattle)
Rattle characteristics include the fast repeated contact/vibration or similar movement/loose parts/missing
clip or fastener/incorrect clearance.
G Knock --(Like a knock on a door)
Knock characteristics include hollow sounding/sometimes repeating/often brought on by driver action.
G Tick--(Like a clock second hand)
Tick characteristics include gentle contacting of light materials/loose components/can be caused by driver
action or road conditions.
G Thump--(Heavy, muffled knock noise)
Thump characteristics include softer knock/dead sound often brought on by activity.
G Buzz--(Like a bumble bee)
Buzz characteristics include high frequency rattle/firm contact.
G Often the degree of acceptable noise level will vary depending upon the person. A noise that you may
judge as acceptable may be very irritating to the customer.
G Weather conditions, especially humidity and temperature, may have a great effect on noise level.

Revision: December 2006 GW-5 2007 Sentra
SQUEAK AND RATTLE TROUBLE DIAGNOSES

DUPLICATE THE NOISE AND TEST DRIVE
If possible, drive the vehicle with the customer until the noise is duplicated. Note any additional information on
the Diagnostic Worksheet regarding the conditions or location of the noise. This information can be used to
duplicate the same conditions when you confirm the repair.
If the noise can be duplicated easily during the test drive, to help identify the source of the noise, try to dupli-
cate the noise with the vehicle stopped by doing one or all of the following:
1) Close a door.
2) Tap or push/pull around the area where the noise appears to be coming from.
3) Rev the engine.
4) Use a floor jack to recreate vehicle "twist".
5) At idle, apply engine load (electrical load, half-clutch on M/T model, drive position on A/T model).
6) Raise the vehicle on a hoist and hit a tire with a rubber hammer.
G Drive the vehicle and attempt to duplicate the conditions the customer states exist when the noise occurs.
G If it is difficult to duplicate the noise, drive the vehicle slowly on an undulating or rough road to stress the
vehicle body.
CHECK RELATED SERVICE BULLETINS
After verifying the customer concern or symptom, check ASIST for Technical Service Bulletins (TSBs) related
to that concern or symptom.
If a TSB relates to the symptom, follow the procedure to repair the noise.
LOCATE THE NOISE AND IDENTIFY THE ROOT CAUSE
1. Narrow down the noise to a general area.To help pinpoint the source of the noise, use a listening tool
(Chassis Ear: J-39570, Engine Ear: J-39565 and mechanic's stethoscope).
2. Narrow down the noise to a more specific area and identify the cause of the noise by:
G removing the components in the area that you suspect the noise is coming from.
Do not use too much force when removing clips and fasteners, otherwise clips and fasteners can be bro-
ken or lost during the repair, resulting in the creation of new noise.
G tapping or pushing/pulling the component that you suspect is causing the noise.
Do not tap or push/pull the component with excessive force, otherwise the noise will be eliminated only
temporarily.
G feeling for a vibration with your hand by touching the component(s) that you suspect is (are) causing the
noise.
G placing a piece of paper between components that you suspect are causing the noise.
G looking for loose components and contact marks.
Refer to GW-7, "Generic Squeak and Rattle Troubleshooting" .
REPAIR THE CAUSE
G If the cause is a loose component, tighten the component securely.
G If the cause is insufficient clearance between components:

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo