Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Sentra 2000-2005 Approved Nissan Sentra 2002 PB
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download PB documenatation <<
Text preview - extract from the document
F BRAKES
A
B
SECTION
PARKING BRAKE SYSTEM C
D
E
CONTENTS
PARKING BRAKE CONTROL .................................. 2 . Inspection ................................................................ 2
. PB
Components ............................................................ 2
. Adjustment ............................................................... 3
.
Removal and Installation ......................................... 2
. SERVICE DATA AND SPECIFICATIONS (SDS) ....... 4 .
Parking Brake .......................................................... 4
. G
H
I
J
K
L
M
PB-1
PARKING BRAKE CONTROL
PARKING BRAKE CONTROL PFP:36010
Components EFS001EI
WBR187
Removal and Installation EFS001EJ
1. Remove center console. Refer to IP-11, "Removal and Installa-
tion" .
2. Disconnect the parking brake front cable.
3. Remove the control lever.
4. Remove bolts, slacken and remove the front cable.
5. Remove lock plate and disconnect cable.
6. Remove the rear cables.
WFIA0010E
Inspection EFS001EK
1. Check control lever or parking brake pedal assembly for wear or other damage. Replace if necessary.
2. Check cables for discontinuity or deterioration. Replace if necessary.
3. Check warning lamp and switch. Replace if necessary.
4. Check parts at each connecting portion and, if found deformed or damaged, replace.
PB-2
PARKING BRAKE CONTROL
Adjustment EFS001EL
A
Pay attention to the following points after adjustment.
q There is no drag when control lever is being released.
q Be sure that toggle lever returns to stopper when parking brake B
lever is released.
1. Loosen parking brake cable.
2. Depress brake pedal fully more than five times. C
3. Operate control lever 10 times or more with a full stroke [215.2
mm (8.47 in)].
4. Adjust control lever by turning adjusting nut. D
5. Pull control lever with specified amount of force. Check lever SBR264B
stroke and ensure smooth operation.
Number of notches : 6 - 7 [196 N (20 kg, 44 lb)] E
6. Bend warning lamp switch plate. Warning lamp should come on when lever is pulled or depressed one
notch. It should go off when the lever is fully released.
PB
G
H
I
J
K
L
M
PB-3
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
Parking Brake EFS001EM
Type Lever
Number of notches
6-7
[under force of 196 N (20 kg, 44 lb)]
Number of notches
1
when warning lamp comes on
PB-4
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo