Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Titan 2004-2009 Approved Nissan Titan 2004 SC

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download SC documenatation <<

Text preview - extract from the document

K ELECTRICAL

STARTING & CHARGING SYSTEM
SECTION SC B

E
CONTENTS
PRECAUTIONS ......................................................... 2
. DIAGNOSTIC PROCEDURE 1 .......................... 14 . F
Precautions for Supplemental Restraint System DIAGNOSTIC PROCEDURE 2 .......................... 15 .
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- MINIMUM SPECIFICATION OF CRANKING
SIONER" ................................................................. 2
. VOLTAGE REFERENCING COOLANT TEM- G
Wiring Diagrams and Trouble Diagnosis ................. 2 . PERATURE ........................................................ 16 .
PREPARATION .......................................................... 3
. Removal and Installation ....................................... 16 .
Special Service Tool ................................................ 3
. REMOVAL .......................................................... 16 .
H
Commerical Service Tools ....................................... 3 . INSTALLATION .................................................. 16 .
BATTERY ................................................................... 4
. CHARGING SYSTEM .............................................. 17 .
How to Handle Battery ............................................ 4 . System Description ................................................ 17 .
METHODS OF PREVENTING OVER-DIS- Wiring Diagram -- CHARGE -- ............................ 18 . I
CHARGE .............................................................. 4
. Trouble Diagnoses with Battery/Starting/Charging
CHECKING ELECTROLYTE LEVEL ................... 4 . System Tester ........................................................ 19.
SPECIFIC GRAVITY CHECK .............................. 5 . DIAGNOSTIC RESULT ITEM CHART ............... 20 . J
CHARGING THE BATTERY ................................ 6 . WORK FLOW ..................................................... 21 .
Trouble Diagnoses with Battery/Starting/Charging DIAGNOSTIC PROCEDURE 1 .......................... 22 .
System Tester ......................................................... 6
. DIAGNOSTIC PROCEDURE 2 .......................... 23 .
SC
DIAGNOSTIC RESULT ITEM CHART ................. 8 . DIAGNOSTIC PROCEDURE 3 .......................... 23 .
Removal and Installation ......................................... 9 . DIAGNOSTIC PROCEDURE 4 .......................... 25 .
REMOVAL ............................................................ 9
. DIAGNOSTIC PROCEDURE 5 .......................... 26 .
INSTALLATION .................................................... 9. MALFUNCTION INDICATOR ............................. 27 . L
STARTING SYSTEM ............................................... 10 . Removal and Installation ....................................... 27 .
System Description ............................................... 10. REMOVAL .......................................................... 27 .
Wiring Diagram -- START -- .................................11 . INSTALLATION .................................................. 27 . M
Trouble Diagnoses with Battery/Starting/Charging SERVICE DATA AND SPECIFICATIONS (SDS) ..... 28 .
System Tester ....................................................... 12
. Battery ................................................................... 28
.
DIAGNOSTIC RESULT ITEM CHART ............... 12 . Starter .................................................................... 28
.
WORK FLOW ..................................................... 13 . Generator .............................................................. 28
.

Revision: January 2005 SC-1 2004 Titan
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EKS008W0

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Wiring Diagrams and Trouble Diagnosis EKS008W1

When you read wiring diagrams, refer to the following:
q GI-14, "How to Read Wiring Diagrams" .
q PG-4, "POWER SUPPLY ROUTING CIRCUIT" for power distribution circuit.
When you perform trouble diagnosis, refer to the following:
q GI-11, "HOW TO FOLLOW TEST GROUPS IN TROUBLE DIAGNOSES".
q GI-27, "How to Perform Efficient Diagnosis for an Electrical Incident".

Revision: January 2005 SC-2 2004 Titan
PREPARATION

PREPARATION PFP:00002
A
Special Service Tool EKS008W2

Tool number
Description
Tool name B
J-44373 Model 620
Battery/Starting/Charging system
tester
C

D
SEL403X

F
Commerical Service Tools EKS008W3

Tool number
Description G
Tool name
Power tool Loosening bolts and nuts

I
PBIC0190E

Revision: January 2005 SC-3 2004 Titan
BATTERY

BATTERY PFP:AYBGL

How to Handle Battery EKS008W4

CAUTION:
q If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt
booster battery.
q After connecting battery cables, ensure that they are tightly clamped to battery terminals for good
contact.
q Never add distilled water through the hole used to check specific gravity.
METHODS OF PREVENTING OVER-DISCHARGE
The following precautions must be taken to prevent over-discharging
a battery.
q The battery surface (particularly its top) should always be kept
clean and dry.
q The terminal connections should be clean and tight.
q At every routine maintenance, check the electrolyte level.
This also applies to batteries designated as "low maintenance"
and "maintenance-free".

MEL040F

q When the vehicle is not going to be used over a long period of
time, disconnect the negative battery terminal.

MEL041F

q Check the charge condition of the battery.
Periodically check the specific gravity of the electrolyte. Keep a
close check on charge condition to prevent over-discharge.

MEL042F

CHECKING ELECTROLYTE LEVEL
WARNING:
Do not allow battery fluid to come in contact with skin, eyes, fabrics, or painted surfaces. After touch-
ing a battery, do not touch or rub your eyes until you have thoroughly washed your hands. If acid con-
tacts eyes, skin or clothing, immediately flush with water for 15 minutes and seek medical attention.

Revision: January 2005 SC-4 2004 Titan
BATTERY

q Remove the cell plug using a suitable tool.
q Add distilled water up to the MAX level. A

MEL043F

D
Sulphation
A battery will be completely discharged if it is left unattended
for a long time and the specific gravity will become less than
1.100. This may result in sulphation on the cell plates. E
To determine if a battery has been "sulphated", note its voltage
and current when charging it. As shown in the figure, less cur-
rent and higher voltage are observed in the initial stage of F
charging sulphated batteries.
A sulphated battery may sometimes be brought back into ser-
vice by means of a long, slow charge, 12 hours or more, fol-
lowed by a battery capacity test. G

PKIA2353E

SPECIFIC GRAVITY CHECK H
1. Read hydrometer and thermometer indications at eye level.
2. Use the following chart to correct your hydrometer reading
according to electrolyte temperature. I

SC
MEL042FA

Hydrometer Temperature Correction
L
Battery electrolyte temperature

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo