Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Titan 2004-2009 Approved Nissan Titan 2006 PB
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download PB documenatation <<Text preview - extract from the documentF BRAKES
A
SECTION
PARKING BRAKE SYSTEM
PB B
C
D
E
CONTENTS
PREPARATION .......................................................... 2
. PARKING BRAKE SHOE .......................................... 6 . PB
Commercial Service Tools ....................................... 2. Removal and Installation ......................................... 6
.
PARKING BRAKE SYSTEM ..................................... 3 . COMPONENTS .................................................... 6.
On-Vehicle Service .................................................. 3
. REMOVAL ............................................................ 6
. G
PEDAL STROKE .................................................. 3. INSPECTION AFTER REMOVAL ........................ 7 .
INSPECTION ....................................................... 3
. INSTALLATION .................................................... 7
.
ADJUSTMENT ..................................................... 3
. SERVICE DATA AND SPECIFICATIONS (SDS) ....... 9 .
H
PARKING BRAKE CONTROL .................................. 4 . Parking Brake .......................................................... 9
.
Components ............................................................ 4
. Parking Brake Control ............................................. 9
.
Removal and Installation ......................................... 4
.
REMOVAL ............................................................ 4
. I
INSTALLATION .................................................... 5
.
J
K
L
M
Revision: October 2006 PB-1 2006 Titan
PREPARATION
PREPARATION PFP:00002
Commercial Service Tools EFS004P1
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
(Kent-Moore No.) Description
Tool name
(J-21177-A) Measuring rear rotor drum to parking
Brake drum clearance gauge brake shoe clearance
WFIA0167E
Power tool Loosening bolts and nuts
PBIC0190E
Revision: October 2006 PB-2 2006 Titan
PARKING BRAKE SYSTEM
PARKING BRAKE SYSTEM PFP:36010
A
On-Vehicle Service EFS0068V
PEDAL STROKE
G When parking brake pedal is operated with the specified force, make sure the stroke is within the specified B
number of notches. Check by listening and counting the ratchet clicks.
Pedal stroke : 3 - 4 notches [under force of 196 N (20.0 kg-f, 44.1 lb-f)]
C
INSPECTION
G Make sure the components are attached properly, checking for looseness or backlash.
G Check parking brake pedal assembly for bends, damage and cracks, and replace if necessary. D
G Check cable for wear and damage, and replace if necessary.
G Check parking brake warning lamp switch for malfunction, and replace if necessary. Refer to DI-31, "Wir-
ing Diagram -- WARN --" . E
ADJUSTMENT
1. Remove the lower instrument panel LH. Refer to IP-13, "LOWER INSTRUMENT PANEL LH" .
2. Partially engage parking brake pedal to access adjusting nut. PB
3. Insert a deep socket wrench to rotate adjusting nut and loosen
cable sufficiently. Then, disengage the parking brake pedal.
G
H
I
WFIA0165E
4. Remove the wheel and tire using power tool. J
5. Remove the disc rotor and measure inner diameter at widest
point using Tool.
K
Tool number : -- (J-21177-A)
6. Transfer measurement less 0.6 mm to the parking brake shoes
and adjust accordingly. L
7. Using wheel nuts, secure the disc rotor to the hub to prevent it
from tilting.
8. Rotate the disc rotor to make sure there is no drag. M
9. Adjust cable as follows:
a. Operate pedal 10 or more times with a force of 490 N (50 kg-f,
110 lb-f).
b. Rotate adjusting nut with deep socket to adjust pedal stroke to
specification.
Pedal stroke : 3 - 4 notches [under force of
196 N (20.0 kg-f, 44.1 lb-f)]
c. With parking brake pedal completely disengaged, make sure
there is no drag on the parking brake.
10. Install the disc rotor.
11. Install the wheel and tire using power tool. WFIA0166E
12. Install the lower instrument panel LH. Refer to IP-13, "LOWER
INSTRUMENT PANEL LH" .
Revision: October 2006 PB-3 2006 Titan
PARKING BRAKE CONTROL
PARKING BRAKE CONTROL PFP:36010
Components EFS004P3
WFIA0218E
1. Pedal assembly 2. Front cable 3. Right rear cable
4. Left rear cable 5. Return spring 6. Equalizer
7. Adjusting nut 8. Lock plate
Removal and Installation EFS004P4
REMOVAL
1. Remove lower instrument panel. Refer to IP-13, "LOWER INSTRUMENT PANEL LH" .
2. On models with floor shift, remove center console. Refer to IP-15, "REMOVAL AND INSTALLATION" .
3. Remove floor trim. Refer to EI-41, "Removal and Installation" .
4. Remove adjusting nut.
5. Remove the lock plate from the front cable.
6. Remove front cable retaining bolts and nut.
7. Disconnect return spring from equalizer.
8. Disconnect right and left rear cables from equalizer.
9. Remove rear disc rotors. Refer to BR-31, "Removal and Installa-
tion of Brake Caliper and Disc Rotor" .
10. Remove parking brake shoe, and remove rear cable from toggle
lever. Refer to PB-6, "PARKING BRAKE SHOE" .
11. Remove right and left rear cables retaining bolts and nuts, then WFIA0165E
remove right and left rear cables.
Revision: October 2006 PB-4 2006 Titan
PARKING BRAKE CONTROL
INSTALLATION
Installation is in the reverse order of removal. A
CAUTION:
Do not reuse adjusting nut after removing it.
G Adjust parking brake. Refer to PB-3, "ADJUSTMENT" . B
C
D
E
PB
G
H
I
J
K
L
M
Revision: October 2006 PB-5 2006 Titan
PARKING BRAKE SHOE
PARKING BRAKE SHOE PFP:44060
Removal and Installation EFS004P5
COMPONENTS
LFIA0222E
1. Anti-rattle pins 2. Back plate 3. Shoes
4. Return springs 5. Adjuster 6. Retainers
7. Toggle lever
REMOVAL
WARNING:
Clean the brakes with a vacuum dust collector to minimize the hazard of airborne particles or other
materials.
NOTE:
Remove the disc rotor only with the parking brake pedal completely in the released position.
1. Remove the rear disc rotor. Refer to BR-31, "Removal and Installation of Brake Caliper and Disc Rotor" .
2. Remove the return springs.
3. Remove the adjuster.
4. Disconnect the rear cable from the toggle lever, if necessary.
G Remove pin retainer and withdraw cable end from toggle lever.
5. Remove the retainers, anti-rattle pins and shoes.
Revision: October 2006 PB-6 2006 Titan
PARKING BRAKE SHOE
INSPECTION AFTER REMOVAL
Lining Thickness Inspection A
G Check thickness of lining.
Standard thickness "A" : 3.79
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo