Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Titan 2004-2009 Approved Nissan Titan 2007 ACC
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ACC documenatation <<Text preview - extract from the documentB ENGINE
A
ACCELERATOR CONTROL SYSTEM
SECTION ACC ACC
C
D
E
CONTENTS
PRECAUTIONS ......................................................... 2
. ASSEMBLY .......................................................... 3
. F
Precautions for Supplemental Restraint System NON-ADJUSTABLE ACCELERATOR PEDAL
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- ASSEMBLY .......................................................... 5
.
SIONER" ................................................................. 2
. SERVICE DATA AND SPECIFICATIONS (SDS) ....... 7 . G
ACCELERATOR CONTROL SYSTEM ..................... 3 . Accelerator Control .................................................. 7
.
Removal and Installation ......................................... 3. ACCELERATOR PEDAL STROKE AND
ADJUSTABLE ACCELERATOR PEDAL TRAVEL ................................................................ 7
.
H
I
J
K
L
M
Revision: August 2006 ACC-1 2007 Titan
PRECAUTIONS
PRECAUTIONS PFP:00001
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EBS00RE0
The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
G To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
G Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
G Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Revision: August 2006 ACC-2 2007 Titan
ACCELERATOR CONTROL SYSTEM
ACCELERATOR CONTROL SYSTEM PFP:18005
A
Removal and Installation EBS00L3P
ADJUSTABLE ACCELERATOR PEDAL ASSEMBLY
Adjustable Accelerator Pedal ACC
C
D
E
F
G
H
I
J
LBIA0379E
1. Adjustable accelerator pedal assem- 2. Adjustable accelerator pedal bracket 3. Adjustable pedal electric motor (part
bly (part of the accelerator pedal assembly) of the accelerator pedal assembly)
K
4. Adjustable brake pedal cable (part
of the accelerator pedal assembly)
CAUTION: L
G Do not disassemble the accelerator pedal adjusting mechanism.
G Before removal and installation, the accelerator and brake pedals must be in the frontmost posi-
tion. This is to align the base position of the accelerator and brake pedals. M
G Do not disassemble the accelerator pedal assembly.
G Do not remove the accelerator pedal position sensor from the accelerator pedal bracket.
G Avoid damage from dropping the accelerator pedal assembly during handling.
G Keep the accelerator pedal assembly away from water.
Removal
1. Move the accelerator and brake pedals to the frontmost position.
2. Turn the ignition switch OFF and disconnect the negative battery terminal.
3. Disconnect the adjustable brake pedal cable from the adjustable brake pedal.
G Unlock, then pull the adjustable brake pedal cable to disconnect it from the adjustable brake pedal.
Revision: August 2006 ACC-3 2007 Titan
ACCELERATOR CONTROL SYSTEM
4. Disconnect the adjustable pedal electric motor electrical connec-
tor.
5. Disconnect the adjustable pedal electric motor memory electri-
cal connector, if equipped.
6. Disconnect the accelerator position sensor electrical connector.
7. Remove the two upper and one lower accelerator pedal nuts.
8. Remove the adjustable accelerator pedal assembly.
CAUTION:
G Do not disassemble the accelerator pedal assembly.
G Do not remove the accelerator pedal position sensor LBIA0380E
from the accelerator pedal bracket.
G Do not disassemble the accelerator pedal adjusting mechanism.
G Avoid damage from dropping the accelerator pedal assembly during handling.
G Keep the accelerator pedal assembly away from water.
Installation
Installation is in the reverse order of removal.
Inspection After Installation
G Check that the accelerator pedal moves smoothly within the specified ranges.
Adjustable accelerator pedal
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo