Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Versa 2007-2009 Approved Nissan Versa 2007 FL

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download FL documenatation <<

Text preview - extract from the document

B ENGINE

SECTION
FUEL SYSTEM
FL FL

E
CONTENTS
PRECAUTIONS ......................................................... 2
. Components ............................................................ 5
. F
Precautions for Supplemental Restraint System Removal and Installation ......................................... 5
.
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- REMOVAL ............................................................ 5
.
SIONER" ................................................................. 2
. INSPECTION AFTER REMOVAL ........................ 7 . G
PREPARATION .......................................................... 3
. INSTALLATION .................................................... 7
.
Special Service Tools .............................................. 3
. INSPECTION AFTER INSTALLATION ................. 8 .
Commercial Service Tools ....................................... 3 . FUEL TANK ............................................................... 9
.
H
FUEL SYSTEM .......................................................... 4
. Components ............................................................ 9
.
Checking Fuel Lines ................................................ 4
. Removal and Installation ......................................... 9
.
General Precautions ............................................... 4
. REMOVAL ............................................................ 9
.
FUEL LEVEL SENSOR UNIT, FUEL FILTER AND INSTALLATION .................................................. 12
. I
FUEL PUMP ASSEMBLY .......................................... 5 . INSPECTION AFTER INSTALLATION ............... 12 .
SERVICE DATA AND SPECIFICATIONS (SDS) ..... 13 .
Standard and Limit ................................................. 13
. J
FUEL TANK ........................................................ 13
.

Revision: June 2006 FL-1 2007 Versa
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EBS00UHK

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
G To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
G Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
G Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.

Revision: June 2006 FL-2 2007 Versa
PREPARATION

PREPARATION PFP:00002
A
Special Service Tools EBS00UHL

The actual shapes of the Kent-Moore tools may differ from those of the special tools illustrated here.
Tool number Description FL
(Kent-Moore No.)
Tool name
KV991J0090 Removing and installing fuel tank lock ring C
(J-46214)
Fuel tank lock ring tool

LBIA0353E
E
Commercial Service Tools EBS00UHM

Tool name Description
F
Power tools Loosening bolts and nuts

PBIC0190E H

Revision: June 2006 FL-3 2007 Versa
FUEL SYSTEM

FUEL SYSTEM PFP:17503

Checking Fuel Lines EBS00TSF

Inspect fuel lines, fuel filler cap and fuel tank for improper attach-
ment, leaks, cracks, damage, loose connections, chafing or deterio-
ration.
If necessary, repair or replace damaged parts.

SMA803A

General Precautions EBS00TSG

WARNING:
When replacing fuel line parts, be sure to observe the following.
G Put a "CAUTION: FLAMMABLE" sign in the work area.
G Be sure to work in a well ventilated area and have a CO2 fire extinguisher.
G Do not smoke while working on the fuel system. Keep open flames and sparks away from the work
area.
G Put drained fuel in an explosion-proof container and put the lid on securely. Keep the container in
safe area.
CAUTION:
G Use gasoline required by the regulations for octane number. Refer to GI-6, "Precautions for Fuel
(Unleaded Regular Gasoline Recommended)" .
G Before removing fuel line parts, perform the following procedures:

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo