Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Versa 2007-2009 Approved Nissan Versa 2007 SC

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download SC documenatation <<

Text preview - extract from the document

K ELECTRICAL

STARTING & CHARGING SYSTEM
SECTION SC B

E
CONTENTS
PRECAUTIONS ......................................................... 2
. System Tester ........................................................ 18. F
Precautions for Supplemental Restraint System DIAGNOSTIC RESULT ITEM CHART ............... 18 .
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- WORK FLOW ..................................................... 19 .
SIONER" ................................................................. 2
. DIAGNOSTIC PROCEDURE 1 .......................... 20 . G
PREPARATION .......................................................... 3
. DIAGNOSTIC PROCEDURE 2 .......................... 21 .
Special Service Tool ................................................ 3
. MINIMUM SPECIFICATION OF CRANKING
Commercial Service Tools ....................................... 3 . VOLTAGE REFERENCING COOLANT TEM-
H
BATTERY ................................................................... 4
. PERATURE ........................................................ 22 .
How to Handle Battery ............................................ 4 . Removal and Installation ....................................... 23 .
METHODS OF PREVENTING OVER-DIS- REMOVAL .......................................................... 23 .
CHARGE .............................................................. 4
. INSTALLATION .................................................. 23 . I
CHECKING ELECTROLYTE LEVEL ................... 4 . CHARGING SYSTEM .............................................. 24 .
SPECIFIC GRAVITY CHECK .............................. 5 . System Description ................................................ 24 .
CHARGING THE BATTERY ................................ 6 . Wiring Diagram -- CHARGE -- ............................ 25 . J
Trouble Diagnoses with Battery/Starting/Charging Trouble Diagnoses with Battery/Starting/Charging
System Tester ......................................................... 6
. System Tester ........................................................ 26.
DIAGNOSTIC RESULT ITEM CHART ................. 8 . DIAGNOSTIC RESULT ITEM CHART ............... 27 .
SC
Removal and Installation ......................................... 9 . WORK FLOW ..................................................... 28 .
REMOVAL ............................................................ 9
. DIAGNOSTIC PROCEDURE 1 .......................... 29 .
INSTALLATION .................................................... 9. DIAGNOSTIC PROCEDURE 2 .......................... 30 .
STARTING SYSTEM ............................................... 10 . DIAGNOSTIC PROCEDURE 3 .......................... 31 . L
System Description ............................................... 10. Removal and Installation ....................................... 32 .
M/T MODELS ..................................................... 10. REMOVAL .......................................................... 32 .
A/T MODELS ..................................................... 10. GENERATOR PULLEY INSPECTION ............... 32 . M
CVT MODELS .....................................................11 . INSTALLATION .................................................. 32 .
Wiring Diagram -- START -- ................................ 12 . SERVICE DATA AND SPECIFICATIONS (SDS) ..... 33 .
M/T MODELS ..................................................... 12. Battery ................................................................... 33
.
A/T MODELS ..................................................... 14. Starter .................................................................... 33
.
CVT MODELS .................................................... 16 . Alternator ............................................................... 33
.
Trouble Diagnoses with Battery/Starting/Charging

Revision: June 2006 SC-1 2007 Versa
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EKS00IAV

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
G To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
G Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
G Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.

Revision: June 2006 SC-2 2007 Versa
PREPARATION

PREPARATION PFP:00002
A
Special Service Tool EKS00IAW

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number Description B
(Kent-Moore No.)
Tool name
-- C
(J-44373) Model 620
Battery/Starting/Charging system
tester
D

Tests batteries, starting and charging sys-
SEL403X tems.
E

-- Tests and charges batteries
(J-48087) G
Battery Service Center

WKIA5280E

I
Commercial Service Tools EKS00IAX

Tool name Description
Power tool Loosening bolts and nuts J

PBIC0190E
L

Revision: June 2006 SC-3 2007 Versa
BATTERY

BATTERY PFP:AYBGL

How to Handle Battery EKS00IAY

CAUTION:
G If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt
booster battery.
G After connecting battery cables, ensure that they are tightly clamped to battery terminals for good
contact.
G Never add distilled water through the hole used to check specific gravity.
METHODS OF PREVENTING OVER-DISCHARGE
The following precautions must be taken to prevent over-discharging
a battery.
G The battery surface (particularly its top) should always be kept
clean and dry.
G The terminal connections should be clean and tight.
G At every routine maintenance, check the electrolyte level.
This also applies to batteries designated as "low maintenance"
and "maintenance-free".

MEL040F

G When the vehicle is not going to be used over a long period of
time, disconnect the negative battery terminal.

MEL041F

G Check the charge condition of the battery.
Periodically check the specific gravity of the electrolyte. Keep a
close check on charge condition to prevent over-discharge.

MEL042F

CHECKING ELECTROLYTE LEVEL
WARNING:
Do not allow battery fluid to come in contact with skin, eyes, fabrics, or painted surfaces. After touch-
ing a battery, do not touch or rub your eyes until you have thoroughly washed your hands. If acid con-
tacts eyes, skin or clothing, immediately flush with water for 15 minutes and seek medical attention.

Revision: June 2006 SC-4 2007 Versa
BATTERY

G Remove the cell plug using a suitable tool.
G Add distilled water up to the MAX level. A

MEL043F

D
Sulfation
A battery will be completely discharged if it is left unattended
for a long time and the specific gravity will become less than
1.100. This may result in sulfation on the cell plates. E
To determine if a battery has been sulfated, note its voltage and
current when charging it. Less current and higher voltage are
observed in the initial stage of charging sulfated batteries, as F
shown.
A sulfated battery may sometimes be brought back into service
by means of a long, slow charge, 12 hours or more, followed by
a battery capacity test. G

WKIA4166E

SPECIFIC GRAVITY CHECK H
1. Read hydrometer and thermometer indications at eye level.
2. Use the following chart to correct your hydrometer reading
according to electrolyte temperature. I

SC
MEL042FA

Hydrometer Temperature Correction
L
Battery electrolyte temperature

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo