Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan X-Trail 2005 2006 Approved 2006 SB
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download SB documenatation <<Text preview - extract from the documentSEAT BELTS
H RESTRAINTS
A
SECTION SB
SEAT BELTS
B
C
D
E
CONTENTS
PRECAUTIONS ......................................................... 2
. REMOVAL OF LH/RH SEAT BELT ...................... 4 . F
Precautions for Supplemental Restraint System INSTALLATION OF LH/RH SEAT BELT ............... 4 .
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- REMOVAL OF CENTER SEAT BELT .................. 5 .
SIONER" ................................................................. 2
. INSTALLATION OF CENTER SEAT BELT ........... 5 . G
Precautions for Seat Belt Service ........................... 2 . Seat Belt Inspection ................................................. 6
.
AFTER A COLLISION .......................................... 2 . AFTER A COLLISION .......................................... 6 .
SEAT BELTS ............................................................. 3
. PRELIMINARY CHECKS ..................................... 6 .
SB
System Description ................................................. 3
. SEAT BELT RETRACTOR ON-VEHICLE
SEAT BELT WARNING LAMP ............................. 3 . CHECK ................................................................. 7
.
Removal and Installation of Front Seat Belt ............ 3 . SEAT BELT RETRACTOR OFF-VEHICLE
REMOVAL OF SEAT BELT RETRACTOR ........... 3 . CHECK ................................................................. 8
. I
INSTALLATION OF SEAT BELT RETRACTOR..... 3 TOP TETHER STRAP CHILD RESTRAINT .............. 9 .
REMOVAL OF SEAT BELT BUCKLE ................... 4 . Removal and Installation ......................................... 9.
INSTALLATION OF SEAT BELT BUCKLE ........... 4 . REMOVAL ............................................................ 9
. J
Removal and Installation of Rear Seat Belt ............ 4 . INSTALLATION .................................................... 9
.
K
L
M
Revision: 2006 July SB-1 2006 X-Trail
PRECAUTIONS
PRECAUTIONS PFP:00001
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" AHS000PQ
The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SRS and SB section of
this Service Manual.
WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Precautions for Seat Belt Service AHS000RE
CAUTION:
q Before removing the seat belt pre-tensioner assembly, turn the ignition switch off, disconnect the
both battery cables and wait at least 3 minutes.
q Do not use electrical test equipment for seat belt pre-tensioner connector.
q After replacing or reinstalling seat belt pre-tensioner assembly, or reconnecting front seat belt
pre-tensioner connector, check the system function. Refer to SRS-13, "SRS Operation Check" .
q Do not use disassembled buckle or seat belt assembly.
q Replace anchor bolts if they are deformed or worn out.
q Never oil tongue and buckle.
q If any component of seat belt assembly is questionable, do not repair. Replace the whole seat belt
assembly.
q If webbing is cut, frayed, or damaged, replace seat belt assembly.
q When replacing seat belt assembly, use a genuine NISSAN seat belt assembly.
AFTER A COLLISION
WARNING:
Inspect all seat belt assemblies including retractors and attaching hardware after any collision.
NISSAN recommends that all seat belt assemblies in use during a collision be replaced unless the col-
lision was minor and the belts show no damage and continue to operate properly. Failure to do so
could result in serious personal injury in an accident. Seat belt assemblies not in use during a colli-
sion should also be replaced if either damage or improper operation is noted. Seat belt pre-tensioner
should be replaced even if the seat belts are not in use during a frontal collision in which the air bags
are deployed.
Replace any seat belt assembly (including anchor bolts) if:
q The seat belt was in use at the time of a collision (except for minor collisions and the belts, retractors and
buckles show no damage and continue to operate properly).
q The seat belt was damaged in an accident. (i.e. torn webbing, bent retractor or guide).
q The seat belt attaching point was damaged in an accident. Inspect the seat belt attaching area for damage
or distortion and repair as necessary before installing a new seat belt assembly.
q Anchor bolts are deformed or worn out.
q The seat belt pre-tensioner should be replaced even if the seat belts are not in use during the collision in
which the air bags are deployed.
Revision: 2006 July SB-2 2006 X-Trail
SEAT BELTS
SEAT BELTS PFP:86884
A
System Description AHS000RF
SEAT BELT WARNING LAMP
q Fasten driver's seat belt. B
q The seat belt warning lamp should go out.
q If the seat belt warning lamp does not go out. Refer to DI-25, "Wiring Diagram -- WARN --" .
Removal and Installation of Front Seat Belt AHS000RG
C
D
E
F
G
SB
SHIA0243E I
CAUTION:
Before servicing SRS, turn the ignition switch off, disconnect both battery cables and wait at least 3
minutes. J
REMOVAL OF SEAT BELT RETRACTOR
1. Remove adjust cover.
K
2. Remove shoulder anchor bolt.
3. Slide the floor anchor cover.
4. Remove floor anchor bolt. L
5. Remove center pillar upper and lower garnish. Refer to EI-36, "Removal and Installation" .
6. Disconnect the seat belt pre-tensioner connector.
CAUTION: M
q For connecting/disconnecting seat belt pre-tensioner
connector, insert thin screwdriver wrapped in tape into
notch, lift lock and disconnect connector.
q Connect connector with lock raised, and push lock into
connector.
PHIA0341E
7. Remove seat belt pre-tensioner retractor fixing screws to remove seat belt assembly.
INSTALLATION OF SEAT BELT RETRACTOR
CAUTION:
Before servicing SRS, turn the ignition switch off, disconnect both battery cables and wait at least 3
minutes.
Install in the reverse order of removal.
Revision: 2006 July SB-3 2006 X-Trail
SEAT BELTS
REMOVAL OF SEAT BELT BUCKLE
1. Remove front seat. Refer to SE-19, "REMOVAL" .
2. Remove screw, and remove seat cushion inner finisher. Refer to
SE-17, "Component Parts Drawing" .
3. Remove anchor bolt to remove seat belt buckle.
SHIA0244E
INSTALLATION OF SEAT BELT BUCKLE
Install in the reverse order of removal.
Removal and Installation of Rear Seat Belt AHS000RH
SHIA0045E
REMOVAL OF LH/RH SEAT BELT
1. Fold rear seat cushion up.
2. Remove luggage side lower finisher. Refer to EI-36, "Removal and Installation" .
3. Remove outer and inner anchor bolts.
4. Remove rear seat belt retractor.
INSTALLATION OF LH/RH SEAT BELT
Install in the reverse order of removal.
Revision: 2006 July SB-4 2006 X-Trail
SEAT BELTS
REMOVAL OF CENTER SEAT BELT
1. Fold rear seat cushion up. A
2. Remove seat belt retractor cover.
3. Remove anchor bolts securing center seat belt retractor.
B
4. Remove rear seatback. Refer to SE-26, "SEATBACK" .
5. Remove rear seatback board.
6. Remove hog ring securing upper portion of rear seatback trim.
C
7. Remove rear seat belt guide.
D
E
F
SHIA0050E
8. Remove nuts securing rear seat belt.
G
: 9.6 N
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo