Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Xterra 2005-2007.2009 Approved Nissan Xterra 2005 PB
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download PB documenatation <<Text preview - extract from the documentF BRAKES
A
B
SECTION
PARKING BRAKE SYSTEM C
D
E
CONTENTS
PREPARATION .......................................................... 2
. PARKING BRAKE SHOE .......................................... 6 . PB
Commercial Service Tools ....................................... 2. Components ............................................................ 6
.
PARKING BRAKE SYSTEM ..................................... 3 . Removal and Installation ......................................... 6
.
On-Vehicle Service .................................................. 3
. REMOVAL ............................................................ 6
. G
PEDAL STROKE .................................................. 3
. INSPECTION AFTER REMOVAL ........................ 7 .
INSPECTION ....................................................... 3
. INSTALLATION .................................................... 7
.
ADJUSTMENT ..................................................... 3
. SERVICE DATA AND SPECIFICATIONS (SDS) ....... 9 .
H
PARKING BRAKE CONTROL .................................. 4 . Parking Drum Brake ................................................ 9
.
Components ............................................................ 4
. Parking Brake Control ............................................. 9
.
Removal and Installation ......................................... 5
.
REMOVAL ............................................................ 5
. I
INSTALLATION .................................................... 5
.
J
K
L
M
Revision: February 2006 PB-1 2005 Xterra
PREPARATION
PREPARATION PFP:00002
Commercial Service Tools EFS005Y5
Tool number Description
(Kent-Moore No.)
Tool name
-- Measuring rear rotor drum to parking
(J-21177-A) brake shoe clearance
Brake drum clearance gauge
WFIA0167E
Power tool Loosening bolts and nuts
PBIC0190E
Revision: February 2006 PB-2 2005 Xterra
PARKING BRAKE SYSTEM
PARKING BRAKE SYSTEM PFP:36010
A
On-Vehicle Service EFS005Y6
PEDAL STROKE
G When parking brake lever is operated with the specified force, make sure the stroke is within the specified B
number of notches. Check by listening and counting the ratchet clicks.
Pedal stroke : 6 - 8 notches [under force of 196 N (20.0 kg, 44.1 lb)]
C
INSPECTION
G Make sure the components are attached properly, checking for looseness or backlash.
G Check parking brake lever assembly for bends, damage and cracks, and replace if necessary. D
G Check cable for wear and damage, and replace if necessary.
G Check parking brake warning lamp switch for malfunction, and replace if necessary. Refer to DI-29, "Wir-
ing Diagram -- WARN --" . E
ADJUSTMENT
1. Remove rear half of the center console. Refer to IP-15, "CENTER CONSOLE" .
2. Rotate adjusting nut and loosen cable until tension is sufficiently PB
released.
G
H
LFIA0247E
I
3. Remove the wheel and tire using power tool.
4. Remove the rotor and measure inner diameter at widest point J
using Tool.
Tool number : -- (J-21177-A)
K
5. Transfer measurement less 0.6 mm to the parking brake shoes
and adjust accordingly.
6. Using wheel nuts, secure the disc to the hub to prevent it from L
tilting.
7. Rotate disc rotor to make sure there is no drag.
8. Adjust cable as follows: M
a. Operate parking brake lever 10 or more times with a force of 490
N (50 kg, 110 lb).
b. Rotate adjusting nut to adjust lever stroke to specification.
Lever stroke : 6 - 8 notches [under force of
196 N (20.0 kg, 44.1 lb)]
c. With parking brake pedal completely disengaged, make sure
there is no drag on the parking brake.
WFIA0166E
Revision: February 2006 PB-3 2005 Xterra
PARKING BRAKE CONTROL
PARKING BRAKE CONTROL PFP:36010
Components EFS005Y7
WFIA0406E
1. Control lever assembly 2. Front cable grommet 3. Left rear cable
4. Pin 5. Right rear cable 6. Return spring
7. Equalizer 8. Front cable 9. Adjusting nut
Revision: February 2006 PB-4 2005 Xterra
PARKING BRAKE CONTROL
Removal and Installation EFS005Y8
REMOVAL A
1. Disconnect return spring from equalizer.
2. Remove right and left rear cables from equalizer.
3. Remove front parking brake cable bolts from under vehicle. B
4. Remove rear half of center console. Refer to IP-15, "CENTER CONSOLE" .
5. Remove four control lever assembly bolts, then remove control lever assembly.
C
6. Remove the front cable grommet and cover from control lever assembly.
7. Remove front cable to contol lever assembly bolt.
8. Remove the control lever assembly adjusting nut, then remove front cable. D
CAUTION:
Do not reuse adjusting nut after removing it.
9. Remove the rear disc rotors. Refer to BR-29, "Removal and Installation of Brake Caliper and Disc Rotor" . E
10. Remove parking brake shoes, and remove rear cable from toggle lever. Refer to PB-6, "Removal and
Installation" .
11. Remove right and left rear cable bolts and nuts, then remove right and left rear cables. PB
INSTALLATION
G Installation is in the reverse order of removal.
G
CAUTION:
Do not reuse adjusting nut after removing it.
G Adjust parking brake. Refer to PB-3, "ADJUSTMENT" .
H
I
J
K
L
M
Revision: February 2006 PB-5 2005 Xterra
PARKING BRAKE SHOE
PARKING BRAKE SHOE PFP:44060
Components EFS005Y9
LFIA0246E
1. Anchor block 2. Back plate 3. Anchor
4. Shoes 5. Shoe hold-down spring 6. Retainer
7. Shoe hold-down pin 8. Adjuster 9. Rear return spring
10. Adjuster access plug 11. Disc rotor 12. Front return spring
13. Pin retainer 14. Toggle lever
Removal and Installation EFS005YA
REMOVAL
WARNING:
Clean the brakes with a vacuum dust collector to minimize the hazard of airborne particles or other
materials.
Revision: February 2006 PB-6 2005 Xterra
PARKING BRAKE SHOE
NOTE:
Remove the disc rotor only with the parking brake pedal completely disengaged. A
1. Remove the rear disc rotor. Refer to BR-29, "Removal and Installation of Brake Caliper and Disc Rotor" .
2. Remove the return springs.
3. Remove the adjuster. B
4. Remove the retainers, anti-rattle pins and shoes.
5. Remove pin retainer, then disconnect the parking brake cable from the toggle lever.
C
6. Remove back plate.
INSPECTION AFTER REMOVAL
Lining Thickness Inspection D
G Check thickness of lining.
Standard thickness "A" : 5.15
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo