Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Xterra 2000-2004 Approved Nissan Xterra 2004 LU

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download LU documenatation <<

Text preview - extract from the document

B ENGINE

LU
SECTION
ENGINE LUBRICATION SYSTEM C

E
CONTENTS
KA24DE VG33E and VG33ER F

PRECAUTIONS ......................................................... 2 . PRECAUTIONS ....................................................... 11 .
Precautions for Supplemental Restraint System Precautions for Supplemental Restraint System
G
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- (SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ................................................................. 2
. SIONER" ................................................................ 11
.
Precautions for Liquid Gasket ................................. 2 . Precautions for Liquid Gasket ............................... 11 .
REMOVAL OF LIQUID GASKET ......................... 2 . REMOVAL OF LIQUID GASKET ........................ 11 . H
LIQUID GASKET APPLICATION PROCEDURE 2 ..... LIQUID GASKET APPLICATION PROCEDURE 11 ...
PREPARATION .......................................................... 4 . PREPARATION ........................................................ 13 .
Special Service Tools .............................................. 4 . Special Service Tools ............................................ 13 . I
LUBRICATION SYSTEM ........................................... 5 . LUBRICATION SYSTEM ......................................... 14 .
Lubrication Circuit ................................................... 5. Lubrication Circuit .................................................. 14.
ENGINE OIL .............................................................. 7
. ENGINE OIL ............................................................. 15
. J
Oil Pressure Check ................................................. 7 . Oil Pressure Check ................................................ 15 .
OIL PUMP .................................................................. 8
. OIL PUMP ................................................................ 16
.
Removal and Installation ......................................... 8 . Removal and Installation ....................................... 16 .
Regulator Valve ....................................................... 9. Disassembly and Assembly ................................... 16 . K
Oil Filter ................................................................... 9
. Inspection .............................................................. 16
.
Oil Pump Inspection ................................................ 9 . Regulator Valve Inspection .................................... 17 .
SERVICE DATA AND SPECIFICATIONS (SDS) ..... 10 . Oil Filter ................................................................. 17
. L
Oil Pressure Check ............................................... 10 . Oil Filter Bracket .................................................... 18
.
Regulator Valve ..................................................... 10 . REMOVAL AND INSTALLATION ....................... 18 .
Oil Pump ............................................................... 10
. SERVICE DATA AND SPECIFICATIONS (SDS) ..... 19 . M
Oil Pressure Check ................................................ 19 .
Regulator Valve ..................................................... 19 .
Oil Pump ................................................................ 19
.

LU-1
PRECAUTIONS
[KA24DE]
PRECAUTIONS PFP:00001

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EBS00F14

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Precautions for Liquid Gasket EBS00EZK

REMOVAL OF LIQUID GASKET
q After removing the mounting bolts and nuts, separate the mating
surface using a seal cutter and remove the sealant.
CAUTION:
Be careful not to damage the mating surfaces.
q In areas where the cutter is difficult to use, use a plastic hammer
to lightly tap the areas where the sealant is applied.
CAUTION:
If for some unavoidable reason a tool such as a flat-bladed
screwdriver is used, be careful not to damage the mating sur-
faces.
PBIC0002E

LIQUID GASKET APPLICATION PROCEDURE
1. Using a scraper, remove the old sealant adhering to the mating
surface.
q Remove the sealant completely from the groove, mounting
bolts, and bolt holes.
2. Clean the mating surface thoroughly to remove adhering mois-
ture, grease and foreign materials.
3. Install the sealant tube into the tube presser.
Use Genuine Silicone RTV or equivalent. Refer to GI-42,
"Recommended Chemical Products and Sealants" .
PBIC0003E

LU-2
PRECAUTIONS
[KA24DE]
4. Apply the sealant without breaks to the specified area with the
specified dimensions. A
q If there is a groove for the sealant application, apply the seal-
ant to the groove.
LU

EMA0622D

D
q As for the bolt holes, normally apply the sealant inside the
holes. If specified, it should be applied outside the holes.
Make sure to read the instructions in this manual. E
q Within five minutes of sealant application, install the mating
component.
q If the sealant protrudes, wipe it off immediately. F
q Do not retighten after the installation.

q After 30 minutes or more have passed from the installation, fill
the engine with the correct oil and coolant. Refer to MA-12, G
"Recommended Fluids and Lubricants" . SEM159F
CAUTION:
If there are specific instructions in the service manual, observe them. H

LU-3
PREPARATION
[KA24DE]
PREPARATION PFP:00002

Special Service Tools EBS00CBY

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number Description
(Kent-Moore No.)
Tool name
(J34301-C) Measuring oil pressure
Oil pressure gauge set Maximum measuring range:
1: (J34301-1) 1,379 kPa (14 kg/cm2 , 200 psi)
Oil pressure gauge
2: (J34301-2)
Hoses
3: (J34298)
Adapter AAT896

4: (J34282-1)
Adapter
5: (790-301-1230-A)
60

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo