Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 BODY AND ELECTRICAL SECTION Body and Exterior MSA5T0126A27868

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5T0126A27868 documenatation <<

Text preview - extract from the document

                                      SERVICE PROCEDURE                                        [W3A0] 5-1
                                                                                             3. Front Bumper


2. Fuel Flap                                             3. Front Bumper
A: REMOVAL AND INSTALLATION                              A: REMOVAL AND INSTALLATION
1. FUEL FLAP                                             1)   Disconnect the ground cable from the battery.
1) Remove bolts which hold hinge to vehicle body,        2)   Remove front fog light. 
and detach fuel flap and hinge as a unit.                3)   Remove the front grille. 
                                                         4)   Remove the extension of both sides.




                                         S5M0150
                                                                                                 S5M0152A
2) Install in the reverse order of removal.
                                                         5) Remove the seven clips and then detach plate
CAUTION:
Make sure the clearance between the fuel flap            (A).
and vehicle body is equal at all points.
2. FUEL FLAP OPENER
1)   Remove driver's seat and rear seat cushion.
2)   Turn over the floor mat (driver's side).
3)   Remove all clips which hold cable.
4)   Disconnect cable (A) from pull handle (B).
5)   Detach pull handle by removing bolts.


                                                                                                 S5M0397A

                                                         6) Remove under cover. 
                                                         7) Remove the seven clips from under side of
                                                         bumper.



                                        S5M0291B

6) Detach fuel lock holder by turning it.
7) Install in the reverse order of removal.
CAUTION:
After installing opener cable, ensure it moves
smoothly.
                                                                                                  S5M0153




                                                    31

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo