Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 BODY AND ELECTRICAL SECTION Body and Exterior MSA5T0126A27870

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5T0126A27870 documenatation <<

Text preview - extract from the document

5-1   [W4A0]                          SERVICE PROCEDURE
4. Rear Bumper


8) Turn over the front mud guard of the front por-        4. Rear Bumper
tion and then remove bolt.
                                                          A: REMOVAL AND INSTALLATION
                                                          1) Disconnect the ground cable from the battery.
                                                          2) Open rear gate.
                                                          3) Remove the five screws and the clip from the
                                                          rear bumper.




                                         S5M0154

9) Remove bumper face and E/A foam.
10) Remove the four bolts and then detach the
back beam.

                                                                                                   S5M0399

                                                          4) Disconnect license plate light connector.
                                                          5) Remove bolts and clips from under side of
                                                          bumper.




                                         S5M0398

11) Remove the four bolts and then detach the
beam upper.


                                                                                                   S5M0157

                                                          6) Remove bumper face and E/A foam.
                                                          7) Remove canister. 
                                                          8) Remove bolts from bumper stay.



                                         S5M0156

12) Install in the reverse order of removal.
CAUTION:

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo