Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 BODY AND ELECTRICAL SECTION Seats, Seat Belts and Interior MSA5T0126A27915

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5T0126A27915 documenatation <<

Text preview - extract from the document

                                      SERVICE PROCEDURE                                        [W4A1] 5-3
                                                                                            4. Rear Seat Belt


3. ADJUSTABLE SHOULDER ANCHOR                             4. Rear Seat Belt
1) Remove    shoulder anchor bolt. 
                                                          A: REMOVAL AND INSTALLATION
2) Remove    center pillar cover.                                                   Replace rear seat belt worn by occupants of a
3) Remove   center pillar upper trim.                                                   entire assembly should be replaced even if
4) Remove   adjustable shoulder anchor assembly.          damage is not obvious.
                                                          1. OUTER BELT (OUTSIDE)
                                                          1) Remove rear cushion. 
                                                          2) Remove rear backrest. 
                                                          3) Remove rear quarter upper trim and rear quar-
                                                          ter lower trim. 
                                                          4) Remove anchor cover and then remove anchor
                                                          bolt.
                                                          5) Remove bolt and nut and then detach outer belt
                                                          assembly.
                                         S5M0235

5) Install in the reverse order of removal.




                                                                                                   S5M0236

                                                          6) Install in the reverse order of removal.
                                                          NOTE:
                                                          Ensure that seat belt is properly reeled on and off
                                                          after installation of ELR.
                                                          CAUTION:
                                                          

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo