Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 TRANSMISSION AND DIFFERENTIAL SECTION Automatic Transmission and Differential MSA5T0124A27712

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5T0124A27712 documenatation <<

Text preview - extract from the document

                                       SERVICE PROCEDURE                                          [W16B0] 3-2
                                                                                          16. Oil Pump Assembly


16. Oil Pump Assembly                                        5) Remove the inner and outer rotor.

A: DISASSEMBLY
1) Remove the oil seal retainer.
Also remove the O-ring and oil seal (air breather).




                                                                                                     B3M1836B

                                                                (A)   Outer rotor
                                                                (B)   Inner rotor

                                         B3M1834B            B: INSPECTION
   (A)   Oil seal retainer                                   1) Check seal ring and O-ring oil seal for breaks or
   (B)   Oil seal housing                                    damage.
                                                             2) Check other parts for dents or abnormalities.
2) Remove O-rings from oil pump housing.                     3) Selection of oil pump rotor assembly
CAUTION:                                                        (1) Tip clearance
Be careful not to damage O-ring.                                Install inner rotor and outer rotor to oil pump.
                                                                With rotor gears facing each other, measure
3) Remove the four seal rings.                                  crest-to-crest clearance.
CAUTION:                                                     Tip clearance:
Be careful not to damage seal ring.                               0.02 -- 0.15 mm (0.0008 -- 0.0059 in)




                                         B3M1095D
                                                                                                      B3M1837
   (A)   Seal rings
                                                                (2) Side clearance
4) Remove the oil pump cover.                                   Set a depth gauge to oil pump housing, then
NOTE:                                                           measure oil pump housing-to-rotor clearances.
Lightly tap the end of the stator shaft to remove the        Side clearance:
cover.                                                           0.02 -- 0.04 mm (0.0008 -- 0.0016 in)




                                          B3M1835                                                     B3M1838



                                                        89
3-2   [W16C0]                              SERVICE PROCEDURE
16. Oil Pump Assembly


  (3) If depth and/or side clearances are outside              

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo