Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 TRANSMISSION AND DIFFERENTIAL SECTION Transmission Control System MSA5T0124A27726

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5T0124A27726 documenatation <<

Text preview - extract from the document

3-3 [W3A0] SERVICE PROCEDURE
3. Select Lever

7) Install heat shield cover. 3. Select Lever
A: REMOVAL
1) Move the select lever to the "N" position.
2) Remove heat shield cover.

S3M0025

3) Disconnect cable from select lever and then
remove cable bracket.

S3M0538B

(A) Adjusting nuts
(B) Cable bracket

4) Remove front cover.
5) Disconnect connectors, and remove the stay.
6) Remove the six bolts to take out the select lever
assembly from body.

S3M0539

12
SERVICE PROCEDURE [W3B0] 3-3
3. Select Lever

B: DISASSEMBLY 6) While pressing the select lever button B,
remove the select lever grip and indicator cover
1) Remove connectors from plate from the upper select lever, and then remove the
select lever button and spring.
CAUTION:
Position the select lever grip carefully so that
the select lever button does not jump out.

S3M0578A

(A) Shift-lock solenoid and "P" position switch connec-
tor
(B) Indicator light connector
S3M0580A
2) Remove indicator light.
NOTE: (A) Select lever grip
Be careful not to break the indicator light during (B) Upper select lever
removal. (C) Button B
(D) Spring
(E) Indicator

7) Remove shift-lock solenoid and "P" position
switch.

S3M0541

3) Remove the clip.

S3M0018B

(A) Shift-lock solenoid
(B) "P" position switch

8) Remove lock plate.
9) Remove the cap, then the straight pin.

S3M0579

4) Remove the button A.
5) Remove the two screws from the select lever
grip.

13
3-3 [W3C0] SERVICE PROCEDURE
3. Select Lever

10) Remove the lower select lever, and then lift 4) Connect lead harness to connector terminal of
the upper select lever from the plate. shift-lock solenoid, and apply battery power to
check whether the solenoid operates.

S3M0545A
S3M0582
(A) Lower select lever
(B) Upper select lever
(C) Plate D: ASSEMBLY
(D) Cap
(E) Straight pin 1) Clean all parts before assembly.
2) Apply grease [NIGTIGHT LYW No. 2 or equiva-
C: INSPECTION lent] to each part.
3) Assemble in the reverse order of disassembly.
1) Inspect removed parts by comparing with new
ones for deformation, damage and wear. Correct NOTE:
or replace if defective.

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo