Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 4 - Chassis Differentials Rear Differential Member
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Rear Differential Member documenatation <<Text preview - extract from the document REAR DIFFERENTIAL MEMBER
DIFFERENTIALS
7. Rear Differential Member 2) Insert the DOJ of rear drive shaft into rear differ-
ential.
1) Set the vehicle on a lift. NOTE:
2) Disconnect the ground cable from battery. Before inserting, replace the differential side oil
3) Move the selector lever or gear shift lever to "N". seal with a new one.
4) Release the parking brake. ST 28099PA090 SIDE OIL SEAL PROTEC-
5) Loosen the wheel nuts. TOR
6) Jack-up the vehicle and support it with study
racks.
7) Remove the wheels.
8) Remove the rear exhaust pipe and muffler.
Non-turbo model
and
Turbo model ST
and 3) Hereafter, install in the reverse order of removal.
9) Remove the rear differential front member.
NOTE:
C: DISASSEMBLY
When removing the rear differential front member, NOTE:
work the removal procedure as rear differential. Clean the rear differential member before disas-
sembly.
10) Remove the differential rear member. 1) Remove the bolt (A) and (B) which connect front
differential member and differential mounting
B: INSTALLATION bracket.
Install in the reverse order of removal.
1) Position the front member on body by passing it
under the parking brake cable and securing to rear
differential.
NOTE:
When installing the rear differential front member,
do not confuse the installation sequence of the
stopper.
(A)
DI-00227
DI-00058
(B)
DI-00228
DI-38
REAR DIFFERENTIAL MEMBER
DIFFERENTIALS
2) Remove the dynamic damper from front differen- 4) Tighten the nut of connecting bolt (A).
tial member.
Tightening torque:
70 N
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo