Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 4 - Chassis Front Suspension Front Ball Joint

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
Front Ball Joint


>> Download Front Ball Joint documenatation <<

Text preview - extract from the document
                                            FRONT BALL JOINT
                                                                                         FRONT SUSPENSION

4. Front Ball Joint                                        C: INSPECTION
                                                           1) Measure the play of ball joint by the following
A: REMOVAL                                                 procedures. Replace with a new one when the play
1) Remove the wheel.                                       exceeds specified value.
2) Pull out the cotter pin from ball stud, remove the         (1) With 686 N (70 kgf, 154 lb) loaded in direc-
castle nut, and extract the ball stud from transverse         tion shown in the figure, measure the dimension
link.                                                         2 1.
3) Remove the bolt securing ball joint to housing.




                                                                                                    FS-00035
                                           FS-00034
                                                              (2) With 686 N (70 kgf, 154 lb) loaded in direc-
4) Extract the ball joint from housing.                       tion shown in the figure, measure the dimension
B: INSTALLATION                                               2 2.
1) Install the ball joint onto housing.
Tightening torque (Bolt):
  50 N



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo