Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 2 - Engine Section (H4DOTC) FUEL INJECTION (FUEL SYSTEMS) Intake Manifold
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Intake Manifold documenatation <<Text preview - extract from the document INTAKE MANIFOLD
FUEL INJECTION (FUEL SYSTEMS)
3. Intake Manifold (2) Disconnect the power steering switch con-
nector.
A: REMOVAL
1) Release the fuel pressure.
2) Open the fuel filler flap lid and remove the fuel
filler cap.
3) Disconnect the ground cable from battery.
FU-00017
(3) Remove the bolts which secure the power
steering pipe brackets to the intake manifold.
NOTE:
Do not disconnect the power steering hose.
FU-00009
4) Lift up the vehicle.
5) Remove the under cover.
6) Drain the engine coolant about 3.0 2 (3.2 US qt,
2.6 Imp qt).
FU-00018
(4) Remove the bolts which secure the power
steering pump bracket.
FU-00016
7) Remove the air cleaner upper cover and air in-
take boot.
8) Remove the air cleaner element.
9) Remove the intercooler. FU-00019
10) Remove the coolant filler tank. (5) Remove the reservoir tank from the bracket
11) Remove the power steering pump. by pulling it upward.
(1) Remove the front side V-belt.
FU-00020
FU(H4DOTC)-14
INTAKE MANIFOLD
FUEL INJECTION (FUEL SYSTEMS)
(6) Place the power steering pump on the right 15) Disconnect the pressure hose from the intake
side wheel apron. duct.
FU-00021 FU-00024
12) Disconnect the emission hose (A) and connec- 16) Disconnect the engine harness connectors
tor (B) from the PCV hose assembly. from the bulkhead harness connectors.
(A)
(B)
FU-01032 FU-00025
13) Disconnect the engine coolant hoses from the
throttle body.
FU-00026
17) Disconnect the connectors from the engine
FU-01074 coolant temperature sensor (A), oil pressure switch
14) Disconnect the brake booster hose. (B) and crankshaft position sensor (C).
(A)
(B)
(C)
FU-00023 FU-00027
FU(H4DOTC)-15
INTAKE MANIFOLD
FUEL INJECTION (FUEL SYSTEMS)
18) Disconnect the knock sensor connector.
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo