Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 2 - Engine Section (H4DOTC) FUEL INJECTION (FUEL SYSTEMS) Rear Oxygen Sensor

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download Rear Oxygen Sensor documenatation <<

Text preview - extract from the document

                                   REAR OXYGEN SENSOR
                                                                    FUEL INJECTION (FUEL SYSTEMS)

15.Rear Oxygen Sensor                               6) Remove the rear oxygen sensor.
                                                    CAUTION:
A: REMOVAL                                          When removing the oxygen sensor, wait until
1) Disconnect the ground cable from battery.        exhaust pipe cools; otherwise, it will damage
                                                    exhaust pipe.




                                     FU-00009

2) Lift-up the vehicle.                                                                     FU-00371
3) Disconnect the connector from the rear oxygen
sensor.                                             B: INSTALLATION
                                                    1) Before installing rear oxygen sensor, apply anti-
                                                    seize compound only to the threaded portion of
                                                    rear oxygen sensor to make the next removal eas-
                                                    ier.
                                                    CAUTION:
                                                    Never apply anti-seize compound to protector
                                                    of rear oxygen sensor.
                                                    Anti-seize compound:
                                                        JET LUBE SS-30
                                      FU-00081      2) Install the rear oxygen sensor.
4) Remove the clip by pulling out from the upper    Tightening torque:
side of crossmember.                                  21 N

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo