Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 2 - Engine Section (H4SO) Mechanical Timing Belt Assembly

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
Timing Belt Assembly

>> Download Timing Belt Assembly documenatation <<

Text preview - extract from the document
                                    TIMING BELT ASSEMBLY

15.Timing Belt Assembly
A: REMOVAL                                                      (d)

1) Remove the V-belt. 
2) Remove the crank pulley.                                                   (b)   (a)
3) Remove the timing belt cover. 
4) Remove the timing belt guide. (MT model)



                                                        (2) Using white paint, put alignment or arrow
5) If the alignment mark (a) or arrow mark (which       marks on the timing belts in relation to crank
indicates rotation direction) on timing belt fade       sprocket and cam sprockets.
away, put new marks before removing the timing
belt as shown in procedures below.
   (1) Turn the crankshaft using ST. Align the
   mark (a) of sprocket to oil pump notch (b) and
   ensure the right side cam sprocket mark (c) and
   cylinder head matching surface (d) and left side
   cam sprocket mark (e) and timing belt cover
   notch (f) are properly adjusted.
ST 499987500         CRANKSHAFT SOCKET


                                                      Specified data:
                                                        Z1: 46.8 tooth length
                                                        Z2: 43.7 tooth length

                  ST                                                    Z1                Z2


                                                      6) Remove the belt idler (No. 2).

                                    TIMING BELT ASSEMBLY

7) Remove the belt idler No. 2.                   2) Remove the automatic belt tension adjuster as-

8) Remove the timing belt.
                                                  B: INSTALLATION
                                                  1. AUTOMATIC BELT TENSION ADJUST-
                                                  ER ASSEMBLY AND BELT IDLER
                                                  1) Preparation for installation of automatic belt ten-
                                                  sion adjuster assembly;

◦ Jabse Service Manual Search 2022 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo