Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 3 - Transmission Automatic Transmission Oil Pump Housing

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download Oil Pump Housing documenatation <<

Text preview - extract from the document

                                       OIL PUMP HOUSING
AUTOMATIC TRANSMISSION

34.Oil Pump Housing                                    13) Place two wooden blocks on the workbench,
                                                       and stand the transmission case with its rear end
A: REMOVAL                                             facing down.
1) Remove the transmission assembly from the ve-       CAUTION:
hicle.                                 face of the transmission case.
2) Extract the torque converter clutch assembly.
                                      Note that the parking rod and drive pinion protrude
3) Remove the input shaft.                             from the mating surface.




                                                                                            55mm
                                                                                           (2.17in)
                                       AT-00114                                                       AT-00181

4) Lift-up lever behind the transmission harness       14) Remove the oil pump housing and adjusting
connector and disconnect it from stay.                 thrust washer.
5) Disconnect inhibitor switch connector from stay.
6) Remove the ATF charger pipe. 
7) Remove the ATF cooler inlet and outlet pipes.

8) Separation of torque converter clutch case and
transmission case sections 
9) Separate transmission case and extension case
                                                                                                      AT-00182
sections.                                                        (A) Oil pump housing
10) Remove the reduction drive gear. 
11) Remove the reduction driven gear. 
12) Loosen the oil pump housing mounting bolts.




                                       AT-01034




                                                  4AT-100
                                            OIL PUMP HOUSING
                                                                                    AUTOMATIC TRANSMISSION

B: INSTALLATION                                             9) Insert the input shaft while turning lightly by hand
1) Secure the oil pump housing with two nuts and            and verify the protrusion amount.
the bolt.                                                   Normal protrusion A:
Tightening torque:                                            50 -- 55 mm (1.97 -- 2.17 in)
  42 N

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo