Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 3 - Transmission Automatic Transmission Reduction Drive Gear
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Reduction Drive Gear documenatation <<Text preview - extract from the document REDUCTION DRIVE GEAR
AUTOMATIC TRANSMISSION
31.Reduction Drive Gear C: DISASSEMBLY
1) Take out the seal rings.
A: REMOVAL
1) Remove the transmission assembly from the ve-
hicle.
(A)
2) Remove rear vehicle speed sensor, and sepa-
rate the transmission case and extension case.
3) Remove the reduction driven gear.
4) Using ST, extract the reduction drive gear as-
(B)
sembly. AT-00161
ST1 499737100 PULLER SET
ST2 899524100 PULLER SET (A) Seal rings
(B) Reduction drive shaft
(A)
2) Using ST, remove the ball bearing.
ST 498077600 REMOVER
ST1
ST
(A)
ST2
AT-00159
(B)
(A) Reduction drive gear ASSY
B: INSTALLATION AT-00162
1) Install the reduction drive gear assembly.
(A) Ball bearing
NOTE: (B) Reduction drive gear
Insert it fully into position until the bearing shoulder
bottoms. 3) Using a press, remove the reduction drive gear.
(A)
(A)
AT-00160 AT-00163
(A) Reduction drive gear ASSY (A) Reduction drive gear
2) Install the reduction driven gear.
3) Combine the transmission case with the exten-
sion case, and install rear vehicle speed sensor.
4) Install the transmission assembly to the vehicle.
4AT-94
REDUCTION DRIVE GEAR
AUTOMATIC TRANSMISSION
D: ASSEMBLY
1) Press-fit the reduction drive gear to the shaft.
2) Press-fit the a new ball bearing to the reduction
drive gear.
3) Apply Vaseline to outer surface of new seal ring
and shaft groove.
4) Attach seal rings.
(A)
(B)
AT-00161
(A) Seal rings
(B) Reduction drive shaft
E: INSPECTION
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo