Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 3 - Transmission Control Systems AT Shift Lock Solenoid and Range Switch

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download AT Shift Lock Solenoid and Range Switch documenatation <<

Text preview - extract from the document

                  AT SHIFT LOCK SOLENOID AND "P" RANGE SWITCH
                                                                                       CONTROL SYSTEMS

6. AT Shift Lock Solenoid and                         10) Remove the cover.
   "P" Range Switch
A: REMOVAL
1) Disconnect the ground cable from battery.                                  (A)
2) Remove the console box. 
3) Disconnect the connector.
4) Remove the grip.
5) Remove the indicator light from indicator cover.                                              (B)

                                                                                                   CS-00105

                                                             (A) Clip
                                                             (B) Cover

                                                      11) Remove the clamp and remove the shift lock
                                                      solenoid.



                                       CS-00043

6) Remove the indicator cover.
                                                                                             (B)




                                                                                       (A)         CS-00106

                                                             (A) Clamp
                                                             (B) Shift lock solenoid


                                       CS-00095
                                                      B: INSTALLATION
                                                      Install in the reverse order of removal.
7) Remove the slider.
8) Remove the cushion.
9) Remove the clip, and then remove the "P" range
switch.

                              (A)




                                     (B)




                                       CS-00096


       (A) Clip
       (B) "P" range switch




                                                  CS-29
               AT SHIFT LOCK SOLENOID AND "P" RANGE SWITCH
CONTROL SYSTEMS

C: INSPECTION
                      Step                                         Check                     Yes               No
1     CHECK SHIFT LOCK SOLENOID.                      Is the resistance 20 -- 40 ?    Go to step 2.    Replace the shift
      Measure the resistance of shift lock solenoid                                                    lock solenoid and
      connector terminals.                                                                             "P" range switch
        Terminal                                                                                       assembly.
         No. 4 -- No. 5
2     CHECK SHIFT LOCK SOLENOID.                      Is the shift lock solenoid oper- Go to step 3.   Replace the shift
      Connect the battery with shift lock solenoid    ating properly?                                  lock solenoid and
      connector terminal, operate solenoid.                                                            "P" range switch
        Terminal                                                                                       assembly.
         No. 4 (+) -- No. 5 (-)
3     CHECK "P" RANGE SWITCH.                         Is the resistance less than 1   Go to step 4.    Replace the "P"
      1) Move the select lever to "P" range.          ?                                                range switch.
      2) Measure resistance between "P" range
      switch connector terminals.
4     CHECK "P" RANGE SWITCH.                         Is the resistance more than 1   Normal           Replace the "P"
      1) Move the select lever to other than "P"      M ?                                              range switch.
      range.
      2) Measure resistance between "P" range
      switch connector terminals.




                                                       CS-30

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo