Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Impreza 2001-2002.2004-2007 Approved Subaru Impreza 2004 WRX STi 08. MECHANISM AND FUNCTION 03. EMISSION CONTROL (Aux. Emission Control Devices) 01. System Overview
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 01. System Overview documenatation <<
Text preview - extract from the document
W1860BE.book Page 2 Tuesday, January 28, 2003 11:01 PM
SYSTEM OVERVIEW
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
1. System Overview
There are three emission control systems which are as follows:
Crankcase emission control system
Exhaust emission control system
Three-way catalytic converter
Air/fuel (A/F) control system
Ignition control system
Evaporative emission control system
On-board refueling vapor recovery (ORVR) system
Item Main components Function
Crankcase emission control Positive crankcase ventilation Draws blow-by gas into intake manifold from crankcase and
system (PCV) valve burns it together with air-fuel mixture. Amount of blow-by gas to
be drawn in is controlled by intake manifold pressure.
Exhaust Catalyt- Front Three-way catalytic converter Oxidizes HC and CO contained in exhaust gases as well as re-
emis- ic con- ducing NOx.
Rear
sion verter
control
Air/fuel (A/F) con- Engine control module (ECM) Receives input signals from various sensors, compares signals
system
trol system with stored data, and emits a signal for optimal control of air-fuel
mixture ratio.
Front oxygen (A/F) sensor Detects density of oxygen contained exhaust gases.
Rear oxygen sensor Detects density of oxygen contained in exhaust gases.
Throttle position sensor Detects throttle opening.
Manifold absolute pressure sen- Detects absolute pressure of intake manifold.
sor
Intake air temperature sensor Detects intake air temperature of air cleaner case.
Ignition control sys- ECM Receives various signals, compares signals with basic data
tem stored in memory, and emits a signal for optimal control of igni-
tion timing.
Crankshaft position sensor Detects engine speed (revolution).
Camshaft position sensor Detects reference signal for combustion cylinder discrimination.
Engine coolant temperature Detects coolant temperature.
sensor
Knock sensor Detects engine knocking.
Evaporative emission control Canister Absorbs evaporative gas which occurs in fuel tank when engine
system stops, and releases it to combustion chambers for a complete
burn when engine is started. This prevents HC from being dis-
charged into atmosphere.
Purge control solenoid valve Receives a signal from ECM and controls purge of evaporative
gas absorbed by canister.
Pressure control solenoid valve Receives a signal from ECM and controls evaporative gas pres-
sure in fuel tank.
ORVR system Vent valve Controls evaporation pressure in fuel tank.
Drain valve Closes the evaporation line by receiving a signal from ECM to
check the evaporation gas leak.
EC(H4SO)-2
W1860BE.book Page 3 Tuesday, January 28, 2003 11:01 PM
SYSTEM OVERVIEW
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
MEMO
EC(H4SO)-3
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo