Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Impreza 2001-2002.2004-2007 Approved Subaru Impreza 2004 WRX STi 08. MECHANISM AND FUNCTION 13. EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) 07. Evaporative Emission Control System
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 07. Evaporative Emission Control System documenatation <<
Text preview - extract from the document
W1860BE.book Page 10 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
7. Evaporative Emission Control System
A: GENERAL
The evaporative emission control system prevents fuel vapors from escaping into atmosphere.
This system includes a canister, purge control solenoid valve, fuel cut valve, and the lines connect-
ing them.
Fuel vapors in the fuel tank is introduced into the canister through the evaporation line, and are
absorbed by activated carbon in it. The fuel cut valve is also incorporated in the fuel tank line.
The purge control solenoid valve is controlled optimally by the ECM according to the engine con-
dition.
The pressure control solenoid valve incorporated in the fuel tank evaporation line regulates the
pressure/vacuum in the fuel tank under the control of the ECM which uses the signal from the fuel
tank pressure sensor.
The diagnosis of the evaporative emission control system is performed by turning each solenoid
valve ON/OFF to vary the pressure inside the fuel tank and measure this pressure change with the
fuel tank pressure sensor in order to check for leaks and proper valve operation.
EC(H4DOTC)-10
W1860BE.book Page 11 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
: (A)
: (B)
(3)
(1) (4)
(2) (24) (5)
(6)
(23) (25)
(22)
(7)
(21)
(13) (8)
(12) (9)
(20)
(19) (18) (17)(16) (15) (14) (11) (10)
FU-00790
(1) Purge control solenoid valve (11) Drain filter (21) Fuel tank pressure sensor
(2) Purge valve (12) Shut-off valve (22) Fuel gauge
(3) Pressure regulator (13) Vent valve (23) Combination meter
(4) Throttle body (14) Fuel temperature sensor (24) Fuel injector
(5) Fuel filter (15) Fuel level sensor (25) Fuel tank sensor control valve
(6) Intake manifold (16) Fuel pump
(7) ECM (17) Jet pump (A) Fuel line
(8) Canister (18) Fuel cut valve (B) Fuel evaporation line
(9) Pressure control solenoid valve (19) Fuel sub level sensor
(10) Drain valve (20) Fuel tank
EC(H4DOTC)-11
W1860BE.book Page 12 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
B: FUEL CUT VALVE
The fuel cut valve is built onto the evaporation pipe of the fuel tank. The rising level of the fuel in the
fuel tank causes the float to move up and close the cap hole so that no fuel can enter the evapora-
tion line.
(1)
(A)
(1)
(B) (C)
EC-00022
(1) Float (A) To canister
(B) Valve open
(C) Valve closed
EC(H4DOTC)-12
W1860BE.book Page 13 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
C: FUEL TANK CAP
The fuel tank cap has a relief valve which prevents development of vacuum in the fuel tank in the
event of a problem with the fuel vapor line.
When there is no problem with the fuel vapor line, the filler pipe is sealed at the portion (A) and by
the seal pressed against the filler pipe end. If vacuum develops in the fuel tank, the atmospheric
pressure forces the spring down to open the valve; consequently outside air flows into the fuel tank,
thus controlling the inside pressure.
(4)
A (1)
(2)
(3)
EC-00023
(1) Seal
(2) Spring
(3) Valve
(4) Filter
EC(H4DOTC)-13
W1860BE.book Page 14 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
D: CANISTER
The charcoal filled in the canister temporarily stores fuel vapors. When the purge control solenoid
valve is opened by a signal from the ECM, the external fresh air entering the canister carries the
fuel vapors into the collector chamber.
(1) (2)
(3) (4)
(A)
(B)
(5)
(C)
EC-00024
(1) Grid (A) To purge control solenoid valve
(2) Filter (B) From fuel tank
(3) Activated charcoal (C) Air
(4) Filter
(5) Spring
EC(H4DOTC)-14
W1860BE.book Page 15 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
E: PURGE CONTROL SOLENOID VALVE
The purge control solenoid valve is on the evaporation line between the canister and intake mani-
fold. The valve is installed under the intake manifold and lets the evaporative gas absorbed by the
canister be drawn into the intake manifold.
(A) (B)
EC-00074
(A) To canister
(B) To intake manifold
EC(H4DOTC)-15
W1860BE.book Page 16 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
F: PRESSURE CONTROL SOLENOID VALVE
The fuel tank pressure control solenoid valve is located in the evaporation line between the canister
and the fuel tank. It adjusts the fuel tank inside pressure under the control of the ECM.
When the tank inside pressure becomes higher than the atmospheric pressure, the valve is opened
allowing fuel vapors to be introduced into the canister.
On the other hand, when the tank inside pressure becomes lower than the atmospheric pressure,
external air is taken from the drain valve into the canister.
The pressure control solenoid valve can also be electrically closed for diagnosis of the evaporative
emission control system.
(1)
(A)
(2)
(3)
(4)
(B) (C)
(5)
EC-00026
(1) Filter (A) Atmospheric pressure
(2) Coil (B) Shut-off valve
(3) Connector terminal (C) To fuel tank
(4) Diaphragm
(5) Valve
EC(H4DOTC)-16
W1860BE.book Page 17 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
G: DRAIN FILTER
The drain filter is installed at the air inlet port of the vent control solenoid valve. It cleans the air taken
in the canister through the vent control solenoid valve.
(A) (B)
(1)
(2)
(3)
EC-00027
(1) Cap (A) To drain valve
(2) Element (B) To atmosphere
(3) Case
EC(H4DOTC)-17
W1860BE.book Page 18 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
H: VENT VALVE
The vent valve is located in the fuel tank. During filling the fuel tank, fuel vapors are introduced into
the canister through the vent valve.
When the fuel vapor pressure becomes higher than the atmospheric pressure and overcomes the
spring force which is applied to the back side of the diaphragm, the port toward the canister is
opened. The vent valve also contains a float which closes the port toward the canister when the fuel
level rises.
(1)
(2)
(A)
(B) (3)
(4)
(5)
(6)
EC-00028
(1) Spring (A) To filler pipe
(2) Diaphragm (B) To canister
(3) Plate cover
(4) Packing
(5) Float
(6) Float spring
EC(H4DOTC)-18
W1860BE.book Page 19 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
I: SHUT-OFF VALVE
The shut-off valve is located at the top of the fuel filler pipe. When a filler gun is inserted into the
filler pipe, the shut-off valve closes the evaporation line.
(A) (B)
(2)
(3)
(4)
(5)
(6)
(1)
EC-00029
(1) Pin (A) To canister
(2) Valve (B) To fuel tank
(3) Spring
(4) Plate
(5) Shaft
(6) Pin
EC(H4DOTC)-19
W1860BE.book Page 20 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
J: DRAIN VALVE
The drain valve is located on the line connecting the drain filter and canister, just below the drain
filter. The drain valve is forcibly closed by a signal from the ECM while the evaporation system di-
agnosis is being conducted.
(1) (2) (3)
(4)
(5)
(10) (6)
(7)
(9) (8)
EC-00030
(1) Magnetic plate (6) Valve
(2) Yoke (7) Plate
(3) Packing (8) Retainer
(4) Spring (9) Moving core
(5) Valve seat (10) Bobbin
EC(H4DOTC)-20
W1860BE.book Page 21 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
K: FUEL TANK SENSOR CONTROL VALVE
The fuel tank sensor control valve is installed on the top of the fuel tank and its one end is connected
to the fuel tank pressure sensor while its other end is open to the atmosphere.
Normally the passage to the fuel tank pressure sensor is open to the atmosphere, however, the pas-
sage is closed when the ECM sends a signal to make a diagnosis of the evaporative emission con-
trol system.
(A)
(B)
EC-00214
(A) Fuel tank pressure sensor
(B) Atmosphere
EC(H4DOTC)-21
W1860BE.book Page 22 Tuesday, January 28, 2003 11:01 PM
EVAPORATIVE EMISSION CONTROL SYSTEM
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
L: FUEL TANK PRESSURE SENSOR
The fuel tank pressure sensor is installed on the top of the fuel tank and measures the pressure in
the fuel tank.
The measured pressure is converted into an electrical signal and sent to the ECM for diagnosis of
the evaporative emission control system.
(1)
(2)
(A)
(D)
(B)
(C)
EC-00213
(1) Connector (A) Output voltage
(2) Terminal (B) Input pressure
(C) To fuel tank
(D) To fuel tank sensor control valve
EC(H4DOTC)-22
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo