Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Impreza 2001-2002.2004-2007 Approved Subaru Impreza 2004 WRX STi 08. MECHANISM AND FUNCTION 32. CONTROL SYSTEM 02. 6MT Gear Shift Lever
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 02. 6MT Gear Shift Lever documenatation <<
Text preview - extract from the document
W1860BE.book Page 3 Tuesday, January 28, 2003 11:01 PM
6MT GEAR SHIFT LEVER
CONTROL SYSTEM
2. 6MT Gear Shift Lever
A: GENERAL
The six-speed manual transmission's control system has a gear shift lever specially designed for
the use with it. The gearshift lever is complete with a parallel-link gear shift mechanism as is the
case with the five-speed transmission's gearshift lever. To prevent accidental shifting to the reverse
gear, the lever has a mechanism that allows a shift into reverse only after the slider has been pulled
up.
(1)
(2)
135
(3) 24 6R
(4)
(9)
(7)
(10) (11)
(8) (5)
(6)
CS-00248
(1) Knob (5) Cushion rubber (9) Boot
(2) Slider (6) Stay (10) Joint
(3) Holder (7) Reverse check cable (11) Rod
(4) Lever (8) Bushing
CS-3
W1860BE.book Page 4 Tuesday, January 28, 2003 11:01 PM
6MT GEAR SHIFT LEVER
CONTROL SYSTEM
B: OPERATION
When shifting gear into reverse, the driver pulls the slider up (toward the knob). This causes the re-
verse check cable to move the reverse lever on the six-speed transmission to the lock release po-
sition. Since the reverse check system in the transmission then becomes in the state ready for a
shift into reverse, the driver can move the gear shift lever to the reverse position.
Should the reverse check cable be severed, the spring in the holder pushes up the slider and keeps
it in the raised position, alerting the driver to the abnormality. Since the reverse check system does
not function under this condition, a voluntary or involuntary shift to the reverse position can take
place without any restriction.
CS-4
W1860BE.book Page 5 Tuesday, January 28, 2003 11:01 PM
6MT GEAR SHIFT LEVER
CONTROL SYSTEM
(7)
(5)
(6)
(2)
(2)
(8) (7)
(1)
(2)
(3) (4)
CS-00249
(1) Reverse lever (5) Slider (in reverse select lock release position or when
cable is broken)
(2) Reverse check cable (6) Slider (in reverse select lock position)
(3) Reverse select lock position (7) Holder
(4) Reverse select lock release position (8) Spring
CS-5
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo