Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual ENGINE SECTION ENGINE COOLING SYSTEM MSA5TCD95L5484

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD95L5484 documenatation <<

Text preview - extract from the document

2-5                    SERVICE PROCEDURE
1. On-Car Service


                               1. On-Car Service
                               A: DRAINING OF ENGINE COOLANT
                               1) Lift-up the vehicle.




                               2) Fit vinyl tube to drain pipe.




                    B2M0133A


                               3) Loosen drain cock to drain engine coolant into con-
                               tainer.
                               NOTE:
                               Remove radiator cap so that engine coolant will drain
                               faster.




                    B2M0015A


                               B: FILLING OF ENGINE COOLANT
                               1) Remove air vent plug from radiator.




                     B2M0301


                               2) Fill engine coolant into radiator up to filler neck position.




                     B2M0135




                                      6
  SERVICE PROCEDURE                                                2-5
                                                       1. On-Car Service


          3) Fill engine coolant into reservoir tank up to upper level.




B2M0140


          4) Attach radiator cap and reservoir tank cap properly.
          5) Install air vent plug.
          6) Warm-up engine completely for more than five minutes
          at 2,000 to 3,000 rpm.
          7) Stop engine and wait until temperature drops to a safe
          level.
          8) If engine coolant level drops in radiator, add engine
          coolant to filler neck position.
          9) If engine coolant level drops from upper level of reser-
          voir tank, add engine coolant to upper level.
          10) Attach radiator cap and reservoir tank cap properly.




          C: CHECKING OF COOLING SYSTEM
          1) Remove radiator cap, top off radiator, and attach tester
          to radiator in place of cap.
          2) Apply a pressure of 157 kPa (1.6 kg/cm2, 23 psi) to
          radiator to check if:
              (1) Engine coolant leaks at/around radiator.
              (2) Engine coolant leaks at/around hoses or connec-
              tions.
          CAUTION:
B2M0136
          

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo