Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual ENGINE SECTION ENGINE MSA5TCD95L5465

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD95L5465 documenatation <<

Text preview - extract from the document

  SERVICE PROCEDURE                                        2-3
                                                   3. Timing Belt


          3. Timing Belt
          A: REMOVAL
          1. CRANKSHAFT PULLEY AND BELT COVER




                                                        G2M0107




          1) Remove V-belt and A/C belt tensioner.
          2) Remove pulley bolt. To lock crankshaft use ST.
          ST   499977000 CRANKSHAFT PULLEY WRENCH
          3) Remove crankshaft pulley.
          4) Remove left side belt cover.
          5) Remove right side belt cover.
          6) Remove front belt cover.

G2M0108




               15
2-3                 SERVICE PROCEDURE
3. Timing Belt


                            2. TIMING BELT




                                                                               B2M0415A




                            1) If alignment mark k and/or arrow mark (which indicates
                                                    2
                            rotation direction) on timing belt fade away, put new marks
                            before removing timing belt as follows:




                 G2M0616


                               (1) Turn crankshaft, and align alignment marks k on
                                                                                2
                               crankshaft sprocket, and left and right camshaft
                               sprockets with notches k of belt cover and cylinder
                                                        1
                               block.
                            ST    499987500 CRANKSHAFT SOCKET




                 B2M0064A




                                  16
  SERVICE PROCEDURE                                              2-3
                                                         3. Timing Belt


              (2) Using white paint, put alignment and/or arrow
              marks on timing belts in relation to the sprockets.
          Z1: 44 tooth length
          Z2: 40.5 tooth length




G2M0111


          2) Loosen tensioner adjuster mounting bolts.




B2M0065

          3)   Remove   belt idler.
          4)   Remove   belt idler No. 2.
          5)   Remove   timing belt.
          6)   Remove   tensioner adjuster.




                 17
2-3              SERVICE PROCEDURE
3. Timing Belt


                     3. BELT TENSIONER AND IDLER




                                                            G2M0112

                     1) Remove belt idler.
                     2) Remove belt tensioner and spacer.
                     3) Remove belt tensioner adjuster.




                          18
  SERVICE PROCEDURE                                           2-3
                                                      3. Timing Belt


          4. SPROCKET




                                                          B2M0416A




          1) Remove left side camshaft sprocket.
          2) Remove right side camshaft sprocket. To lock camshaft
          use ST.
          ST    499207100 CAMSHAFT SPROCKET WRENCH




G2M0114


          3) Remove crankshaft sprocket.
          4) Remove left side belt cover No. 2.
          5) Remove right side belt cover No. 2.
          CAUTION:
          Do not damage or lose the seal rubber when removing
          belt covers.
          6) Remove tensioner bracket.




               19
2-3                SERVICE PROCEDURE
3. Timing Belt


                           B: INSPECTION
                           1. TIMING BELT
                           1) Check timing belt teeth for breaks, cracks, and wear. If
                           any fault is found, replace belt.
                           2) Check the condition of back side of belt; if any crack is
                           found, replace belt.




                           CAUTION:
                           

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo