Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual ENGINE SECTION ON-CAR SERVICES MSA5TCD95L5453

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD95L5453


>> Download MSA5TCD95L5453 documenatation <<

Text preview - extract from the document
                                                              2-2
                                              4. Engine Compression


          4. Engine Compression
          A: MEASUREMENT
          1) After warming-up the engine, turn ignition switch to
          OFF.
          2) Make sure that the battery is fully charged.
          3) Remove all the spark plugs.
          4) Disconnect connectors from fuel injectors.
          5) Fully open throttle valve.
          6) Check the starter motor for satisfactory performance
          and operation.
          7) Hold the compression gauge tight against the spark
          plug hole.
          CAUTION:
          When using a screw-in type compression gauge, the
          screw (put into cylinder head spark plug hole) should
          be less than 18 mm (0.71 in) long.
          8) Crank the engine by means of the starter motor, and
          read the maximum value on the gauge when the pointer is
          steady.
G2M0098


          9) Perform at least two measurements per cylinder, and
          make sure that the values are correct.
          Compression (200 -- 300 rpm and fully open throttle):
             Standard
                1,079 -- 1,275 kPa
                (11.0 -- 13.0 kg/cm2, 156 -- 185 psi)
             Limit
                883 kPa (9.0 kg/cm2, 128 psi)
             Difference between cylinders
                196 kPa (2.0 kg/cm2, 28 psi)




                5



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo