Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD95L5843

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD95L5843 documenatation <<

Text preview - extract from the document

6-2                                      SERVICE PROCEDURE
7. Back-up Light - 8. Room Light and Door Switch


                                                   7. Back-up Light
                                                   A: REMOVAL AND INSTALLATION
                                                   1. BACK-UP LIGHT
                                                   Refer to 6-2 [W5A2] as for removal and installation of rear
                                                   finisher.

                                                   2. BACK-UP LIGHT SWITCH (MT MODEL)
                                                   Refer to 3-1 [W2B1 (AWD) or W3A0 (FWD)] as for removal
                                                   and installation of back-up light switch.

                                                   3. INHIBITOR SWITCH (AT MODEL)
                                                   Refer to 3-2 [W4A4] as for removal and installation of
                                                   inhibitor switch (R position switch).

                                                   B: INSPECTION
                                                   1. INHIBITOR SWITCH (AT MODEL)
                                                   Refer to 3-2 [W2B2] as for inspection of inhibitor switch.



                                                   8. Room Light and Door Switch
                                                   A: REMOVAL AND INSTALLATION
                                                   1.   ROOM LIGHT
                                                   1)   Pry room light lens off using a screwdriver.
                                                   2)   Remove screws which secure room light body.
                                                   3)   Remove room light body while disconnecting connector.


                                       B6M0068


                                                   2. TRUNK ROOM LIGHT (SEDAN)
                                                   1) Turn trunk room light body by hand and remove it from
                                                   rear shelf panel.
                                                   2) Disconnect connector of trunk room light.




                                      B6M0345A

                                                   3. LUGGAGE ROOM LIGHT (WAGON)
                                                   1) Pry luggage room light lens off using a screwdriver.
                                                   2) Remove screws which secure luggage room light body.
                                                   3) Remove luggage room light body while disconnecting
                                                   connector.




                                       B6M0069




                                                          20

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo