Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD95L5855

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD95L5855


>> Download MSA5TCD95L5855 documenatation <<

Text preview - extract from the document
6-2              SERVICE PROCEDURE
19. Sunroof


                         19. Sunroof
                         A: REMOVAL AND INSTALLATION
                         1. SUNROOF AND SUNROOF MOTOR
                         Refer to 5-1 [W16A0] as for removal and installation of
                         sunroof system.




                         2. SUNROOF SWITCH
                         NOTE:
                         The sunroof switch is installed in spot light body.
                         1) Pry spot light lens off using a screwdriver.
                         2) Remove screws which secure spot light body.
                         3) Remove spot light body while disconnecting connec-
                         tors.
                         4) Remove screw which secures sunroof switch, and then
                         remove sunroof switch.
              B6M0353A


                         B: INSPECTION
                         1. SUNROOF SWITCH
                         Set sunroof switch to each position and check continuity
                         between terminals as indicated in table below:
                                          Terminal
                                                     4   3    6      5      2
                         Switch position
                                  Open               k   k
                                  Close              k        k
                                  Tilt up            k               k
              B6M0142A
                                Tilt down            k                      k




                         2. SUNROOF MOTOR
                         1) Apply battery voltage between 1-pin connector and
                         body ground wire.
                         2) Make sure that sunroof motor moves when connecting
                         terminals as described below:
                         



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo