Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD95L5857

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD95L5857


>> Download MSA5TCD95L5857 documenatation <<

Text preview - extract from the document
                                              SERVICE PROCEDURE                                                                   6-2
                                                                                                                      21. Cruise Control


                                                       21. Cruise Control
                                                       A: ADJUSTMENT




                                                                                                                               B6M0356A



CAUTION:                                                              Tightening torque: Nm (kg-m, ft-lb)
k: Must be adjusted when cable end outer is fixed in place,
A
                                                        0                 T: 6.4 -- 11.3 (0.65 -- 1.15, 4.7 -- 8.3)
  so that gap between throttle cam and lever is 1-1 mm
         0
  (0.04 -0.04 in).
  (Must be attached while throttle cam is being pulled by wire
  cable.)
k: Must be coated evenly on cam end inner connection.
B
k: Cover must be inserted securely, until tip of cable
C
  touches cover stopper.




                                                                 47
6-2                     SERVICE PROCEDURE
21. Cruise Control


                                B: REMOVAL AND INSTALLATION
                                1. CRUISE CONTROL MAIN SWITCH
                                1) Remove screws which secure meter visor.
                                2) Remove meter visor from instrument panel while dis-
                                connecting connectors.
                                3) Remove cruise control main switch from meter visor.



                     B6M0154A


                                2. CRUISE CONTROL COMMAND SWITCH
                                1) Remove screw which secures horn pad to the base of
                                steering wheel.
                                2) Remove horn pad from steering wheel while discon-
                                necting connector.
                                3) Disconnect connector of cruise control command
                                switch.
                                4) Remove screws which secure cruise control command
                                switch to steering wheel, and then remove command
                     B6M0357A   switch.
                                WARNING:
                                Refer to 5-5 when removing or installing the module
                                from the airbag equipped model.




                                3. ACTUATOR
                                1) Loosen nut which secures cruise control cable end to
                                throttle cam, and then remove cable from engine throttle
                                cam.
                                2) Remove clip bands from cruise control cable.
                                CAUTION:



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo