Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual MECHANICAL COMPONENTS SECTION AIR CONDITIONING SYSTEM MSA5TCD95L5731

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD95L5731 documenatation <<

Text preview - extract from the document

SERVICE PROCEDURE                                            4-7
                                              10. Performance Test


    10. Performance Test
    1. VEHICLE SET UP
    In order to obtain meaningful test results, the vehicle must
    be set up to meet the following conditions:
    1) Vehicle in shade
    2) No wind
    3) All vehicle doors closed
    4) Front windows opened
    5) Hood opened
    6) Engine speed set at 1,500 rpm.
    7) A/C ON
    8) Temperature control lever -- Maximum cold
    9) Air source -- Recirculation
    10) Blower speed -- 4th position (High)
    11) Operate A/C for 10 minutes (Minimum) before taking
    measurement.

    2. MEASUREMENTS
    After 10 minutes (Minimum) of A/C operation and using
    accurate test equipment, take the following measurements
    (in order):
    1) Evaporator intake air temperature at recirculation door.
    2) Evaporator discharge air temperature at center grill.
    3) Condenser (Ambient) intake air temperature measured
    0.9 m (3 ft) in front and in line with the center of the con-
    denser.
    4) Suction (Low) side pressure
    5) Discharge (High) side pressure
    NOTE:
    If only one thermometer is available; 1) take the ambient
    measurement first; then 2) the intake air; and 3) dis-
    charge air temperature.




          29
4-7                    SERVICE PROCEDURE
10. Performance Test


                           3. MEASUREMENT STANDARD BY VERSES
                           Compare temperature and pressure measurements with
                           the established standards shown in the following charts.




                                                                           B4M0371A




                                30

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo