Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual MECHANICAL COMPONENTS SECTION AIR CONDITIONING SYSTEM MSA5TCD95L5734

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD95L5734


>> Download MSA5TCD95L5734 documenatation <<

Text preview - extract from the document
  SERVICE PROCEDURE                                                  4-7
                                        12. Condenser - 13. Receiver Drier


          NOTE:
          After installing condenser, ensure that guide on lower side
          of condenser is inserted into hole in radiator panel. Tighten
          attaching bolts.
          9) Charge refrigerant. 




          B: INSPECTION
          1) Make sure the condenser fins are free from dust and
          insects. If the fins are clogged, clean by blowing air or
          water through them.
          NOTE:
          To prevent dust and water from getting into the condenser,
          this work must be done when the condenser is installed in
          an actual vehicle.
          2) Check the condenser to see if it shows any sign of oil.
          Should oil ooze or gas leak from the condenser replace it
          with a new one.




          13. Receiver Drier
          A: REMOVAL AND INSTALLATION
          1) Disconnect battery negative terminal.
          2) Discharge refrigerant using refrigerant recovery system.
          
          3) Disconnect pressure switch harness k .    1
          4) Disconnect pipes k . 2
          5) Remove mounting bolt k and remove receiver drier.
                                         3
G4M0640   CAUTION:
          The receiver drier contains a desiccant. Be sure to put
          a blind plug in the detached receiver drier to protect it
          from moisture.
          6) Install the receiver drier in the reverse order of removal.
          7) Charge refrigerant. 




                37



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo