Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual MECHANICAL COMPONENTS SECTION BRAKES MSA5TCD95L5686

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD95L5686


>> Download MSA5TCD95L5686 documenatation <<

Text preview - extract from the document
  SERVICE PROCEDURE                                               4-4
                                                 13. Proportioning Valve


          13. Proportioning Valve




G4M0440




G4M0668


          A: INSPECTION
          1) Install the oil pressure gauges to measure the master
          cylinder fluid pressure (front wheel brake fluid pressure)
          and rear wheel cylinder fluid pressure.
          2) Bleed air from the oil pressure gauges.
          3) Check the master cylinder fluid pressure and rear wheel
          cylinder fluid pressure.
          The standard values are shown in Figure.
          4) For the oil pressure in case of split point, refer to A:
G4M0915
          SPECIFICATIONS [S0A0].
          B: REMOVAL
          1) Remove brake pipe from proportioning valve at four
          places.
          2) Remove proportioning valve from its bracket.
          CAUTION:
          Do not disassemble or adjust the proportioning valve.
          (The proportioning valve must be replaced as an
          assembly.)



          C: INSTALLATION
          1) Install proportioning valve to bracket.
          2) Connect brake pipes correctly to proportioning valve.
          3) Bleed air, then check each joint of brake pipe for oil
          leaks.
          Tightening torque:
             Proportioning valve to brake pipe flare nut:
                    +3          +0.3           +2.2
                 15-2 Nm (1.5-0.2 kg-m, 10.8-1.4 ft-lb)
             Proportioning valve to bracket:
                 18



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo