Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual MECHANICAL COMPONENTS SECTION STEERING SYSTEM MSA5TCD95L5656

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD95L5656


>> Download MSA5TCD95L5656 documenatation <<

Text preview - extract from the document
4-3                                      SERVICE PROCEDURE
5. Control Valve (Power Steering Gearbox) [LHD model]


                                                 5. Control Valve (Power Steering
                                                 Gearbox) [LHD model]
                                                 NOTE:
                                                 This section focuses on the disassembly and reassembly
                                                 of control valve. For the inspection and adjustment and the
                                                 service procedures for associated parts, refer to "Steering
                                                 Gearbox".




                                                                                                      G4M0136



k
1   Power cylinder                      k
                                        6   Torsion bar                       k
                                                                              10   Pipe B
k
2   Cylinder                            k
                                        7   Valve housing                     k
                                                                              11   Pipe A
k
3   Rack piston                         k
                                        8   Valve body                        k
                                                                              12   Pinion
k
4   Rack axle                           k
                                        9   Control valve                     k
                                                                              13   Pinion axle
k
5   Input shaft
                                                 A: CHECKING OIL LEAKING POINTS
                                                 1. OIL LEAKING POINTS
                                                 1) If leak point is other than a, b, c, or d, perform check
                                                 step 5) in [W5A2] before dismounting gearbox from
                                                 vehicle. If gearbox is dismounted without confirming where
                                                 the leak is, it must be mounted again to locate the leak
                                                 point.
                                                 2) Even if the location of the leak can be easily found by
                                                 observing the leaking condition, it is necessary to thor-
                                                 oughly remove the oil from the suspected portion and turn
                                                 the steering wheel from lock to lock about 30 to 40 times
                                                 with engine running, then make comparison of the sus-
                                                 pected portion between immediately after and several
                                                 hours after this operation.
                                                 3) Before starting oil leak repair work, be sure to clean the
                                                 gearbox, hoses, pipes, and surrounding parts. After com-
                                                 pleting repair work, clean these areas again.




                                                            40
SERVICE PROCEDURE                                                4-3
                 5. Control Valve (Power Steering Gearbox) [LHD model]


    2. OIL LEAK CHECK PROCEDURE AND
    REPLACEMENT PARTS
    NOTE:
    Parts requiring replacement are described in the smallest
    unit of spare parts including damaged parts and spare
    parts damaged. In actual disassembly work, accidental
    damage as well as inevitable damage to some related
    parts must be taken into account, and spare parts for them
    must also be prepared. However, it is essential to pinpoint
    the cause of trouble, and limit the number of replacement
    parts as much as possible.
    1) Leakage from "a"
    The oil seal is damaged. Replace valve assembly with a
    new one.
    2) Leakage from "b"
    The torsion bar O-ring is damaged. Replace valve assem-
    bly with a new one.
    3) Leakage from "c"
    The oil seal is damaged. Replace valve assembly with a
    new one.
    4) Leakage from "d"
    The pipe is damaged. Replace the faulty pipe or O-ring.
    5) If leak is other than a, b, c, or d, and if oil is leaking from
    the gearbox, move the right and left boots toward tie-rod
    end side, respectively, with the gearbox mounted to the
    vehicle, and remove oil from the surrounding portions.
    Then, turn the steering wheel from lock to lock 30 to 40
    times with the engine running, then make comparison of
    the leaked portion immediately after and several hours
    after this operation.
    6) Leakage from "e"
    The cylinder seal is damaged. Replace rack bush with a
    new one.
    7) Leakage from "f"
    There are two possible causes. Take following step first.
    Remove the pipe assembly B from the valve housing, and
    close the circuit with ST.
    ST      926420000 PLUG
    Turn the steering wheel from lock to lock 30 to 40 times
    with the engine running, then make comparison of the
    leaked portion between immediately after and several
    hours after this operation.
    CAUTION:
    



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo