Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual MECHANICAL COMPONENTS SECTION SUSPENSION MSA5TCD95L5620

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD95L5620


>> Download MSA5TCD95L5620 documenatation <<

Text preview - extract from the document
  SERVICE PROCEDURE                                               4-1
                                                     3. Front Ball Joint


          3. Front Ball Joint
          A: REMOVAL
          1) Remove the wheel.
          2) Pull out the cotter pin from the ball stud, remove the
          castle nut, and extract the ball stud from the transverse
          link.
          3) Remove the bolt securing the ball joint to the housing.
          4) Extract the ball joint from the housing.
G4M0499


          B: INSPECTION
          1) Measure play of ball joint by the following procedures.
          Replace with a new one when the play exceeds the speci-
          fied value.
              (1) With 686 N (70 kg, 154 lb) loaded in the direction
              shown in the figure, measure dimension 1.



G4M0500


              (2) With 686 N (70 kg, 154 lb) loaded in the opposite
              direction shown in the figure, measure dimension 2.
              (3) Calculate plays from the following formula.
              S= 2 - 1
              (4) When plays are larger than the following value,
              replace with a new one.
          FRONT BALL JOINT
              Specified play for replacement: S
                  Less than 0.3 mm (0.012 in)
G4M0501
          2) When play is smaller than the specified value, visually
          inspect the dust cover.
          3) If the dust cover is damaged, replace with the new ball
          joint.
          4) Check ball joint for damage and cracks. If defective,
          replace with new one.

          C: INSTALLATION
          1) Install ball joint onto housing.
          Torque (Bolt):
              49



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo