Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual MECHANICAL COMPONENTS SECTION WHEELS AND AXLES MSA5TCD95L5642

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD95L5642


>> Download MSA5TCD95L5642 documenatation <<

Text preview - extract from the document
  SERVICE PROCEDURE                                                      4-2
                               8. Steel Wheel and Tire - 9. Aluminum Wheel


          A: INSPECTION OF WHEEL RUNOUT
          1) Jack-up vehicle until wheels clear the floor.
          2) Slowly rotate wheel to check rim "runout" using a dial
          gauge.




G4M0298
                                 Axial runout limit     Radial runout limit
               Steel wheel                   1.5 mm (0.059 in)
             Aluminum wheel                  1.0 mm (0.039 in)

          3) If rim runout exceeds specifications, remove tire from
          rim and check runout while attaching dial gauge to posi-
          tions shown in figure.
          4) If measured runout still exceeds specifications, replace
          the wheel.
G4M0299


          9. Aluminum Wheel
          A: INSPECTION
          Inspection for aluminum wheels is basically the same as
          the one for steel wheels. However, check the rim flange for
          cracks or damage, and replace (not repair) aluminum
          wheel if air leakage is found.




          B: PRECAUTIONS
          Aluminum wheels are easily scratched. To maintain their
          appearance and safety, do the following:
          1) Do not damage aluminum wheels during removal,
          disassembly, installation, wheel balancing, etc. After
          removing aluminum wheels, place them on a rubber mat,
          etc.
          2) While vehicle is being driven, be careful not to ride over
          sharp obstacles or allow aluminum wheels to contact the
          shoulder of the road.
          3) When installing tire chain, be sure to install it properly
          not to have a slack; otherwise it may hit wheel while driv-
          ing.
          4) When washing aluminum wheel, use neutral synthetic
          detergent and water. Avoid using the cleanser including
          abrasive, hard brushes or an automatic car washer.




                45



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo