Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION AWD SYSTEM MSA5TCD95L5610

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD95L5610 documenatation <<

Text preview - extract from the document

  SERVICE PROCEDURE                                               3-4
                                                      1. Propeller Shaft


          1. Propeller Shaft
          A: ON-CAR SERVICE
          Check the following points with propeller shaft installed in
          vehicle.
          1) Joints and connections
          Check for any looseness of yoke flange connecting bolts
          and center bearing retaining bolts.



          2) Splines and bearing locations
          Turn propeller shaft by hand to see if abnormal free play
          exists at splines. Also move yokes to see if abnormal free
          play exists at spiders and bearings.




G3M0019

          3) Runout of propeller shaft
          Turn rear wheels by hand to check for "runout" of propel-
          ler shaft.
          Runout:
              Limit 0.6 mm (0.024 in)
          NOTE:
          Measure runout with a dial gauge at the center of front and
          rear propeller shaft tubes.

G3M0020


          4) Center bearing free play
          While holding propeller shaft near center bearing with your
          hand, move it up and down, and left and right to check for
          any abnormal bearing free play.




G3M0255


          B: REMOVAL
          NOTE:
          Before removing propeller shaft, wrap metal parts with a
          cloth or rubber material.
          1) Disconnect ground cable from battery.
          2) Move selector lever or gear shift lever to "N".
          3) Release the parking brake.
          4) Jack-up vehicle and support it with sturdy racks.
          5) Remove rear exhaust pipe and muffler.
          


                 9
3-4                    SERVICE PROCEDURE
1. Propeller Shaft


                               6) Remove front exhaust cover.




                     G3M0021


                               7) Remove differential mount front cover.




                     G3M0022

                               8) Remove the four bolts which hold propeller shaft to rear
                               differential.
                               NOTE:
                               

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo