Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION AWD SYSTEM MSA5TCD95L5612

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD95L5612


>> Download MSA5TCD95L5612 documenatation <<

Text preview - extract from the document
3-4                                 SERVICE PROCEDURE
3. Rear Differential Front Member


                                        3. Rear Differential Front Member
                                        A: REMOVAL
                                        1) Disconnect ground cable from battery.
                                        2) Move selector lever or gear shift lever to "N".
                                        3) Release the parking brake.
                                        4) Loosen wheel nuts.
                                        5) Jack-up vehicle and support it with sturdy racks.
                                        6) Remove wheels.
                                        7) Remove rear exhaust pipe and muffler.
                                        
                                        8) Remove rear differential front member.
                                        NOTE:
                                        When removing rear differential front member, work the
                                        removal procedure as rear differential.
                                        




                                             38
  SERVICE PROCEDURE                                                 3-4
                                         3. Rear Differential Front Member


          B: INSTALLATION
          To install, reverse the removal sequence.
          1) Position front member on body by passing it under park-
          ing brake cable and securing to rear differential.




G3M1029


          NOTE:
          When installing rear differential front member, do not con-
          fuse the installation sequence of the stopper.




G3M0101

          2) Insert DOJ of rear drive shaft into rear differential.
          ST    28099PA090 SIDE OIL SEAL PROTECTOR
          CAUTION:
          Before inserting, replace the differential side oil seal
          and the circlip at the end of the spline shaft with a new
          one.



G3M1026


          3) Installing procedure hereafter is in the reverse order of
          removal.




                39



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo