Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION AUTOMATIC TRANSMISSION AND DIFFERENTIAL MSA5TCD95L5587

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD95L5587


>> Download MSA5TCD95L5587 documenatation <<

Text preview - extract from the document
   SERVICE PROCEDURE                                              3-2
                                       5. Reduction Drive Gear Assembly


           5. Reduction Drive Gear Assembly
           A: DISASSEMBLY
           1) Take out the seal rings.
           CAUTION:
           Be careful not to damage the seal rings.



G3M0438


           2) Take out the snap ring (outer k ).
                                             1
           CAUTION:
           Be careful not to damage the splines.
           3) Using a press, remove the ball bearing k from shaft k .
                                                     2            3
           (FWD only)




B3M0107A


           4) Using a press, remove the reduction drive gear.




G3M0440


           5) Using a press, remove the ball bearing.




G3M0441




                 83
3-2                                   SERVICE PROCEDURE
5. Reduction Drive Gear Assembly


                                              B: INSPECTION
                                              Make sure that each component is free of harmful gouges,
                                              cuts, or dust.




                                              C: ASSEMBLY
                                              1) Press-fit the ball bearing and reduction drive gear to the
                                              shaft.




                                   G3M0442


                                              2) AWD: Fit the snap ring k securely in the snap ring
                                                                           1
                                                 groove on the shaft k .
                                                                      3
                                                 FWD: Press ball bearing k into place and secure snap
                                                                           2
                                                 ring k to groove in shaft k .
                                                      1                     3




                                   B3M0107A


                                              3) Attach two seal rings.
                                              NOTE:
                                              To make subsequent assembly easier, apply vaseline to
                                              the grooves of the shaft and to the exterior of the seal ring.




                                   G3M0438




                                                    84



◦ Jabse Service Manual Search 2026 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo