Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION AUTOMATIC TRANSMISSION AND DIFFERENTIAL MSA5TCD95L5596

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD95L5596


>> Download MSA5TCD95L5596 documenatation <<

Text preview - extract from the document
  SERVICE PROCEDURE                                                 3-2
                                           14. Differential Case Assembly


          14. Differential Case Assembly
          A: DISASSEMBLY
          1) Using a press and ST, remove the taper roller bearing.
          ST    498077000 REMOVER
          CAUTION:
          Be careful not to damage the speedometer drive gear.


G3M0488


          2) Secure the case in a vise and remove the crown gear
          tightening bolts, then separate the crown gear, case (RH)
          and case (LH).




G3M0489


          3) Pull out the straight pin and shaft, and remove the dif-
          ferential bevel gear, washer, and differential bevel pinion.




G3M0490


          B: INSPECTION
          Check each component for harmful cuts, damage and
          other faults.




          C: ASSEMBLY
          1) Install the washer, differential bevel gear and differen-
          tial bevel pinion in the differential case (RH). Insert the
          pinion shaft, and fit the straight pin.
          NOTE:
          Install straight pin from reverse direction.



G3M0490




               107
3-2                                SERVICE PROCEDURE
14. Differential Case Assembly


                                           2) Install the washer and differential bevel gear to the dif-
                                           ferential case (LH). Then put the case over the differential
                                           case (RH), and connect both cases.
                                           3) Install the crown gear and secure by tightening the bolt.
                                           Standard tightening torque:
                                               62



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo