Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION MANUAL TRANSMISSION AND DIFFERENTIAL MSA5TCD95L5566

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD95L5566 documenatation <<

Text preview - extract from the document

3-1                                       SERVICE PROCEDURE
6. Drive Pinion Assembly (FWD Model)


                                                  6. Drive Pinion Assembly (FWD Model)
                                                  A: DISASSEMBLY
                                                  1) Loosen lock nut using ST1 and ST2.
                                                  ST1 499987100 or 499987003 or 899984103 SOCKET
                                                        WRENCH (35)
                                                  ST2 899884100 HOLDER
                                                  NOTE:
                                                  Remove caulking before taking off lock nut.
                                       G3M0628


                                                  2) Remove 5th driven gear using a press.
                                                  ST   498077000 5TH DRIVEN GEAR REMOVER




                                       B3M0341A


                                                  3) Remove woodruff key.
                                                  4) Remove roller bearing (29 x 74 x 38) and 3rd-4th driven
                                                  gear using ST1 and ST2.
                                                  ST1 899714110 REMOVER
                                                  ST2 499757002 SNAP RING PRESS




                                       G3M0610


                                                  5) Remove 2nd driven gear assembly.
                                                  6) Remove 3rd-4th driven gear key.
                                                  7) Remove 1st driven gear, 2nd gear bushing, and gear &
                                                  hub assembly using ST1 and ST2.
                                                  Replace gear and hub if necessary. Do not attempt to dis-
                                                  assemble if at all possible because they must engage at a
                                                  specified point. If they have to be disassembled, mark the
                                                  engaging point beforehand.
                                                  ST1 499757002 SNAP RING PRESS
                                        G3M0611   ST2 899714110 REMOVER

                                                  8) Remove 1st gear bushing, 1st driven gear thrust plate,
                                                  and roller bearing (41 x 71 x 23) using ST and press.
                                                  ST     498517000 REPLACER
                                                  CAUTION:
                                                  Replace roller bearing (41 x 71 x 23) with a new one if
                                                  this disassembly is performed.


                                       G3M0632




                                                        56
   SERVICE PROCEDURE                                               3-1
                                    6. Drive Pinion Assembly (FWD Model)


           B: ASSEMBLY
           1) Assemble gear and hub assembly.
           k : 1st gear side
            A
           k : 2nd gear side
            B
           k : Flush surface
            C
           k : Stepped surface
            D
           NOTE:
           

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo