Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION TRANSMISSION CONTROL SYSTEM MSA5TCD95L5603

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD95L5603 documenatation <<

Text preview - extract from the document

3-3                        SERVICE PROCEDURE
1. Manual Transmission


                                   1. Manual Transmission
                                   A: REMOVAL
                                   1) Remove console box. 




                                   2) Remove boot plate from the body.




                         B3M0009


                                   3) Remove the spring between the joint and bracket.




                         G3M0680


                                   4) Remove stay from bracket.




                         G3M0681


                                   5) Remove rod from joint.




                         G3M0682




                                         6
  SERVICE PROCEDURE                                              3-3
                                                1. Manual Transmission


          6) Remove gearshift lever.




G3M0683


          7) Remove the exhaust cover and remove cushion rubber
          from the body.




G3M0684


          B: DISASSEMBLY
          1) Disconnect locking wires.




G3M0685


          2) Remove rod from gearshift lever.




G3M0686


          3) Disconnect snap ring.




G3M0687




                7
3-3                         SERVICE PROCEDURE
1. Manual Transmission


                                    4) Remove gearshift lever from stay.




                         G3M0688


                                    5) Disconnect spring pin and bush from gearshift lever.
                                    6) Remove boot from gearshift lever.




                         G3M0689


                                    7)   Remove the following parts from the stay.
                                    k1   Spacer (FWD model)
                                    k2   Bush
                                    k3   Snap ring
                                    k4   O-ring
                                    k5   Bush



                         G3M0690


                                    C: INSPECTION
                                    Check the following parts for deformation, damage and
                                    wear. Repair or replace any defective parts. Determine
                                    defective parts by comparing with new parts.
                                    k Bush
                                     1
                                    k Cushion
                                     2
                                    k Spacer
                                     3
                                    k Boot
                                     4
                                    k Stay, rod and lever
                                     5
                                    k Spring
                                     6




                         B3M0343A



                                            8
  SERVICE PROCEDURE                                                3-3
                                                  1. Manual Transmission


          D: ASSEMBLY
          1) Clean all parts before assembly.
          2) Mount the following parts on the stay.
          k Cushion rubber
           1
          k Bush
           2




G3M0692


          3) Mount the following parts on the gearshift lever.
          k Boot
           1
          k Snap ring
           2
          k O-ring
           3
          k Bush
           4
          k Spring pin
           5
          CAUTION:
          

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo