Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1995 1995 Service Manual TROUBLESHOOTING SECTION ON-BOARD DIAGNOSTICS II SYSTEM MSA5TCD95L5873
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD95L5873 documenatation <<Text preview - extract from the document2-7 ON-BOARD DIAGNOSTICS II SYSTEM
7. Basic Diagnostics Procedure
7. Basic Diagnostics Procedure
Trouble occurs.
Ask the customer when and how the
trouble occurred using interview
check list.
Start the engine.
No Inspection using "9. Diagnostics for
Engine Start Failure [T900]"
Yes
Malfunction indicator lamp (MIL) illu- Inspection using "10. General Diag-
minates. No nostics Table [T1000]"
Yes
Inspection using Subaru select moni-
tor or OBD-II general scan tool. Repair.
(Subaru select monitor: MODE FB1) No trouble code designated.
See NOTE: *1
Trouble code
designated.
Inspection using "11. Diagnostics
Chart with Trouble Code [T11A0]".
See NOTE: *2.
Trouble code Repair.
designated.
Inspection mode
Inspection using Subaru select moni-
tor or OBD-II general scan tool. Clear memory mode.
(Subaru select monitor: MODE FB0)
No trouble code
designated.
END
NOTE:
*1: If trouble code is not shown on display although the
MIL illuminates, perform diagnostics of the MIL (CHECK
ENGINE LIGHT) circuit or combination meter.
*2: Carry out the basic check, only when trouble code
about automatic transmission is shown on display.
100
ON-BOARD DIAGNOSTICS II SYSTEM 2-7
7. Basic Diagnostics Procedure
1. BASIC CHECK ITEMS FOR AT
When trouble code about automatic transmission is shown
on display, carry out the following basic check. After that,
carry out the replacement or repair work.
1) ATF level check
2) Differential gear oil level check
3) ATF leak check
4) Differential gear oil leak check
5) Brake band adjustment
6) Stall test
7) Line pressure test
8) Transfer clutch pressure test
9) Time lag test
10) Road test
11) Shift characteristics
NOTE:
As for the method, refer to 3-2 [W2A1].
101
2-7 ON-BOARD DIAGNOSTICS II SYSTEM
7. Basic Diagnostics Procedure
2. CHECK LIST FOR INTERVIEW
Check the following items when problem occurred.
Customer's name Engine no.
Date of sale Fuel brand
km
Date of repair Odometer reading
miles
Vin no.
Weather Fine Cloudy Rainy Snowy Various/Other
Outdoor Temperature Hot Warm Cool Cold (approx.
◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo