Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1996 1996 Service Manual BODY SECTION BODY AND EXTERIOR MSA5TCD96L6299

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD96L6299 documenatation <<

Text preview - extract from the document

5-1                                       SERVICE PROCEDURE
15. Roof Rack (Wagon only, if equipped) - 16. Sunroof


                                                  15. Roof Rack (Wagon only, if
                                                  equipped)
                                                  A: REMOVAL
                                                  1) Remove roof trim, rear quarter trim, pillar trim, etc.
                                                  
                                                  2) Remove flange bolts.
                                                  3) Remove flange nuts.
                                                  4) Remove roof rail.
                                       B5M0304


                                                  B: INSTALLATION
                                                  Installation is in the reverse order of removal.
                                                  CAUTION:
                                                  To prevent deformation, be sure to install roof rail in
                                                  steps 4), 3), 2) and 1), in that order.




                                                  16. Sunroof
                                                  A: REMOVAL
                                                  1. GLASS LID ASSEMBLY
                                                  1) Completely open sun shade. (Push it back far.)
                                                  2) Remove a clip and detach guide rail cover.
                                                  3) Remove six nuts from the left and right lid bracket.
                                                  4) Working inside, slightly raise glass lid assembly until it
                                                  is disengaged from lid bracket.
                                      B5M0307A    5) Hold both ends of glass lid assembly and remove it at
                                                  an angle.




                                                  2. SUNROOF MOTOR AND RELAY
                                                  1) Remove center pillar trim upper. 
                                                  2) Remove front pillar trim upper. 
                                                  3) Remove assist grip on left side.
                                                  4) Remove sunvisor with hook.
                                                  5) Remove sunroof switch.
                                                  6) Remove rearview mirror.
                                                  7) While rolling up roof trim, disconnect harness clips and
                                                  connector.
                                      B5M0308B    8) While rolling up roof trim, remove spot lamp bracket and
                                                  sunroof motor.

                                                        58
   SERVICE PROCEDURE                                                5-1
                                                              16. Sunroof


           3. SUNROOF FRAME
           1) Remove sunroof switch, center and rear room lamps.
           2) Remove roof trim, rear quarter trim, pillar trim, etc.
           
           3) Remove glass lid assembly.
           4) Remove two harness support clips.



B5M0310A


           5) Disconnect harness clips and connector of sunroof
           motor.
           6) Disconnect front and rear drain tubes.
           CAUTION:
           When installing drain tube, insert it securely into drain
           pipe.
           Length A:
              15 mm (0.59 in) or more
G5M0205


           7) Remove eight nuts.




 B5M0312


           8) Remove set bracket mounting bolts.
           9) Remove sunroof frame.




B5M0382A


           B: INSTALLATION
           Installation is in the reverse order of removal.




                 59
5-1              SERVICE PROCEDURE
16. Sunroof


                         C: ADJUSTMENTS
                         1. ALIGNMENT OF HEIGHT BETWEEN GLASS LID
                         ASSEMBLY AND ROOF PANEL
                         1) Remove guide rail cover.
                         2) Loosen nuts and adjust height by adding (Max: two
                         pieces) and extracting (Max: one piece) shim(s) (Standard:
                         one piece) between glass lid assembly and lid bracket.
                         Difference in height between glass lid assembly and
                         roof panel:
              B5M0315B
              B5M0314B
                             0

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo