Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1996 1996 Service Manual ENGINE SECTION EMISSION CONTROL SYSTEM AND VACUUM FITTING MSA5TCD96L5937

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD96L5937 documenatation <<

Text preview - extract from the document

2-1                              SERVICE PROCEDURE
1. Front Catalytic Converter


                                         1. Front Catalytic Converter
                                         A: REMOVAL
                                         1) Disconnect front oxygen sensor connector.




                               B2M0724


                                         2) Disconnect rear oxygen sensor connector. (California
                                         2200 cc model)




                               B2M0725


                                         3) Lift-up the vehicle.
                                         4) Disconnect rear oxygen sensor connector. (Except Cali-
                                         fornia 2200 cc model)




                               B2M0312


                                         5) Separate center exhaust pipe from rear exhaust pipe.




                               B2M0055


                                         6) Remove bolts which hold front exhaust pipe onto cylin-
                                         der heads.




                               B2M0054




                                               2
  SERVICE PROCEDURE                                                  2-1
                                               1. Front Catalytic Converter


          7) Remove front exhaust pipe and center exhaust pipe
          from hanger bracket.
          CAUTION:
          Be careful not to pull down front exhaust pipe and
          center exhaust pipe.




B2M0313


          8) Separate front catalytic converter from front exhaust
          pipe and center exhaust pipe.




B2M0060


          B: INSTALLATION
          CAUTION:
          Replace gaskets with new ones.
          1) Install front catalytic converter to front exhaust pipe and
          center exhaust pipe.
          Tightening torque:
             30

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo