Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1996 1996 Service Manual ENGINE SECTION ENGINE COOLING SYSTEM MSA5TCD96L5999

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD96L5999 documenatation <<

Text preview - extract from the document

   SERVICE PROCEDURE                                                  2-5
                                                          1. On-Car Service


           1. On-Car Service
           A: DRAINING OF ENGINE COOLANT
           1) Lift-up the vehicle.




           2) Fit vinyl tube to drain pipe.




B2M0133A


           3) Loosen drain cock to drain engine coolant into con-
           tainer.
           NOTE:
           Remove radiator cap so that engine coolant will drain
           faster.




B2M0015A


           B: FILLING OF ENGINE COOLANT
           1) Remove air vent plug from radiator.




 B2M0301


           2) Fill engine coolant into radiator up to filler neck position.




 B2M0135




                  7
2-5                   SERVICE PROCEDURE
1. On-Car Service


                              3) Fill engine coolant into reservoir tank up to upper level.




                    B2M0140


                              4) Attach radiator cap and reservoir tank cap properly.
                              5) Install air vent plug.
                              6) Warm-up engine completely for more than five minutes
                              at 2,000 to 3,000 rpm.
                              7) Stop engine and wait until temperature drops to a safe
                              level.
                              8) If engine coolant level drops in radiator, add engine
                              coolant to filler neck position.
                              9) If engine coolant level drops from upper level of reser-
                              voir tank, add engine coolant to upper level.
                              10) Attach radiator cap and reservoir tank cap properly.




                              C: CHECKING OF COOLING SYSTEM
                              1) Remove radiator cap, top off radiator, and attach tester
                              to radiator in place of cap.
                              2) Apply a pressure of 157 kPa (1.6 kg/cm2, 23 psi) to
                              radiator to check if:
                                  (1) Engine coolant leaks at/around radiator.
                                  (2) Engine coolant leaks at/around hoses or connec-
                                  tions.
                              CAUTION:
                    B2M0136
                              

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo