Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1996 1996 Service Manual ENGINE SECTION ENGINE MSA5TCD96L5964

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD96L5964


>> Download MSA5TCD96L5964 documenatation <<

Text preview - extract from the document
   SERVICE PROCEDURE                                                   2-3
                          1. General Precautions - 2. Hydraulic Lash Adjuster


           1. General Precautions
           1) Before disassembling engine, place it on ST3.
           ST1 498457000 ENGINE STAND ADAPTER RH
           ST2 498457100 ENGINE STAND ADAPTER LH
           ST3 499817000 ENGINE STAND




G2M0106


           2) All parts should be thoroughly cleaned, paying special
           attention to the engine oil passages, pistons and bearings.
           3) Rotating parts and sliding parts such as piston, bearing
           and gear should be coated with oil prior to assembly.
           4) Be careful not to let oil, grease or coolant contact the
           timing belt, clutch disc and flywheel.
           5) All removed parts, if to be reused, should be reinstalled
           in the original positions and directions.
           6) Gaskets and lock washers must be replaced with new
           ones. Liquid gasket should be used where specified to
           prevent leakage.
           7) Bolts, nuts and washers should be replaced with new
           ones as required.
           8) Even if necessary inspections have been made in
           advance, proceed with assembly work while making
           rechecks.




           2. Hydraulic Lash Adjuster
           A: INSPECTION
           1) Disconnect blow-by hose from rocker cover.
           2) Remove spark plug cap.




           3) Remove left and right rocker covers.
           CAUTION:
           Before removing left rocker cover, disconnect battery
           cables and generator cable.




B2M0413A




                 11



◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo