Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 1995-1999 Approved Subaru Legacy 1996 1996 Service Manual ELECTRICAL SECTION BODY ELECTRICAL SYSTEM MSA5TCD96L6383

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD96L6383 documenatation <<

Text preview - extract from the document

6-2                                          SERVICE PROCEDURE
9. Spot Light - 10. Front Wiper and Washer


                                                 9. Spot Light
                                                 A: REMOVAL AND INSTALLATION
                                                 1. SPOT LIGHT AND SWITCH
                                                 1) Pry spot light lens off using a screwdriver.
                                                 2) Remove screws which secure spot light body.
                                                 3) Remove spot light body while disconnecting connec-
                                                 tor(s).

                                       B6M0346


                                                 B: INSPECTION
                                                 1. SPOT LIGHT SWITCH
                                                 Move switch and check continuity between terminal of spot
                                                 light switch connector and steel plate as shown.
                                                 Switch position       Connector terminal       Plate
                                                       Open (OFF)
                                                      Push in (ON)             k                 k

                                       B6M0347


                                                 10. Front Wiper and Washer
                                                 A: ON-CAR SERVICES
                                                 1. ADJUSTMENT
                                                 1) Turn the wiper switch to OFF position.
                                                 2) Adjust blades in original position as shown in figure by
                                                 changing wiper arm installation.




                                                 Original position:
                                                    A: 25 -- 30 mm (0.98 -- 1.18 in)
                                                    B: 35 -- 40 mm (1.38 -- 1.57 in)




                                       G6M0115


                                                 3) Stop the vehicle.
                                                 4) Adjust washer ejecting point on windshield glass as
                                                 shown in figure.
                                                 Ejecting point:
                                                    A: 375 mm (14.76 in)
                                                    B: 150 mm (5.91 in)
                                                    C: 380 mm (14.96 in)


                                       G6M0116




                                                        22
   SERVICE PROCEDURE                                                6-2
                                               10. Front Wiper and Washer


           B: REMOVAL AND INSTALLATION
           1. BLADE
           Pull out blade following the arrow direction from arm while
           pushing up locking clip.




B6M0107A


           2. WIPER ARM
           1) Open engine hood.
           2) Remove cap of wiper arm installation nut.
           3) Remove the nut which secures wiper arm.
           4) Remove wiper arm.
           5) Installation is in the reverse order of removal.
           NOTE:
           Remove metal sludge from the wiper arm fixture before
           installing it.
 G6M0118
           Tightening torque:
               20

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo